Tempered glass is made by heating annealed glass uniformly. The annealed glass is then cooled rapidly by blowing air uniformly onto both surfaces at the same time. This is known as air quenching. Rapid cooling increases the compression forces on the surface and the tension forces inside the glass.  

Two main characteristics of tempered glass are its toughness and safety.

1. Toughened glass, when broken, shatters into cube-shaped particles, reducing serious deep cut injury. It therefore qualifies as a safe glazing material.

2. Toughened glass offers greater strength against impact compared to annealed glass, and thus, better resistance to the force of wind. It is more effective if placed within a well-designed, overall glazing system.

Machinery List  

Five production Lines and one line uses TM Glass Finland with patented heat balance sysmtem to ensure toughening performance (of flatness of 2.85mm).

Six sets of cutting machines including three sets of auto cutting machine and three sets of water cutting machines.

Twenty sets of trimming machine that they are three sets for special type, five sets for double line and the rest tevelve sets for straight line.

Besides, there are seven sets of hole-puching machines.

Product Info:

Type: Curve/Flat

Daily output: 8000sqm

Max Size: 2100mm*3600mm

Min Size: 150mm*250mm