Name: Extruding & Film Casting Machine (Stretch Film Making Machine)
Use: This stretch film making machine set is used for producing LDPE or LLDPE stretch film, which is equipped with single screw, the extruded stretch film is both sides adhesive. If the machine adopts double screws, the two hoppers should use different type of material one sid of the extruded stretch film is adhesive and the other side is normal. It is widely used for packing architrdture and hardware parts etc.
Characteristics:
1. Screw and cylinder are all made of 38CRNOALS alloy and treates by nitrogen. It hsa an advantage of corrosion resistance and endurance etc.
2. The cooling device adopts cycle water cooling provide the best transparent effect of the stretch film.
3. Take-up equipment adopts with friction type rewinding and equipment with edge correcting device to ensure the quality.
1. Screw and cylinder are all made of 38CRNOALS alloy and treates by nitrogen. It hsa an advantage of corrosion resistance and endurance etc.
2. The cooling device adopts cycle water cooling provide the best transparent effect of the stretch film.
3. Take-up equipment adopts with friction type rewinding and equipment with edge correcting device to ensure the quality.
Model | SJ-50x2 | SJ-65 |
Diameter of screw | Ø50mmx2 | Ø65mm |
L/D | 28:1(L/D) | 30:1(L/D) |
Width of products | 200-550mm | 200-1000mm |
Thickness | 0.015-0.03mm | 0.015-0.03mm |
Main motor power | 7.5kwx2 | 15kw |
Heating power | 30kw | 30kw |
Machine weight | ≈2.8T | 3T |
Overall dimensions | 5600×2600×1800mm | 6000×1500×2500mm |