CJ-F10 Fingerprint reader
Feature
CJ-F10 is a fingerprint reader produced by ZK Software specifically for the Access Control .Its remarkable advantage is that it can match with most of the access controllers on the market ,inland or abroad, It supports Wiegand 26-64 output ,and integrates special access control software which can be upload, download, delete and wiegand products ,all input /output are using anti-jamming protection and over-voltage/circuit protection. The product experiences the strict degradation test before leaving factory ,high stability the main feature.
Benefits
Support wiegand 26 or user-defined format, match most of door access controller
External connected with IC/ID reader.Card+ Fingerprint validation mode for current reader
External connected with IC/ID reader.Card+ Fingerprint validation mode for current reader
Adopt Biokey 2007 latest algorithm and intel32 bits processor
Option for built in Mifare reader or EM reader , it can deal with 3000 fingerprint templates , no matter good or poor quality, within only 1 second.
Adopt solid, durable, anti-static optical sensor
user-defined ID No, easy to manage
Standard RS485 connection, RS 232 or TCP/IP as auxiliary communication port
Support u are u sensor or F10 for collecting fingerprint template
Stability protection: reset switch, hardware watchdog, communication setting initialization by hardware, anti-over voltage and over current protection.
Dismantle alarm TTL output
Convenient DB15 connection
Option for built in Mifare reader or EM reader , it can deal with 3000 fingerprint templates , no matter good or poor quality, within only 1 second.
Adopt solid, durable, anti-static optical sensor
user-defined ID No, easy to manage
Standard RS485 connection, RS 232 or TCP/IP as auxiliary communication port
Support u are u sensor or F10 for collecting fingerprint template
Stability protection: reset switch, hardware watchdog, communication setting initialization by hardware, anti-over voltage and over current protection.
Dismantle alarm TTL output
Convenient DB15 connection
Applicable Wiegand manage software for fingerprint enrollment, download, upload, deletion
Version
|
Name
|
Type
|
Note
|
Standard
|
Standard fingerprint reader
|
F10
|
Standard version
|
With in-built ID module
|
Fingerprint reader with in-built ID module
|
F10-ID600
|
Template capacity : 600, support 1: 1 and 1: N
|
F10-ID5000
|
Template capacity : 5000, support 1: 1
|
||
F10-ID8000
|
Template capacity : 8000, support 1: 1
|
||
With in-build Mifare module
|
Fingerprint reader with in-built IC module
|
F10-SMART
|
Infinite capacity, support 1: 1
|
Technical Specification
Terms
|
Content
|
|||
Wiegand input and output
|
provide a standard wiegand26 or user-defined format to controller, accept the wiegand26 input, that is, a ID card reader could connect toit directly
|
|||
Capacity of the templates
|
Standard version
|
600 templates
|
||
The version With in-built ID module
|
600/5000/8000 templates(three options)
|
|||
The version with in-build Mifare module
|
Infinite capacity
|
|||
Verification mode
|
Standard version
|
1: 1 or 1: N, support only fingerprint
|
||
The version with ID card
|
When 600 templates, 1: 1or 1: N, support only fingerprint, card+fingerprint, only card
|
|||
The version with ID card
|
When 5000/8000 templates, 1: 1, support card+ fingerprint
|
|||
Communication ways
|
TCP/IP as backup
|
Default IP address: 192.168.1.201
|
||
RS-485
|
Default baud rate: 38400, device number: 1, port: COM1
|
|||
Sensor
|
Type
|
Optical
|
||
Resolution
|
500DPI
|
|||
Display
|
Indication
|
Power indicator, dual-color LED
|
||
Identification
|
Speed
|
speed<2 sec
|
||
Technical spec
|
FAR≤0.0001%, FFR≤1%
|
|||
Alarm
|
Dismantle alarm
|
TTL (transistor-transistor logic) output for alarm
|
||
Configuration
|
Intel32bit processor, 2007 version algorithm
|
|||
Power
|
12V DC, currency under idle status<50mA, wording currency<400mA
|
|||
Operation environment
|
Temperature
|
0℃-45℃
|
||
Humidity
|
20%-80%
|
|||
Software
|
Management software of fingerprint reader
|
|||
Size
|
130×58×62mm
|