Free samples available
Description:
Gouging carbon is used for cutting and boring, removing of defects in welds and casts, grooving on the back of weld and flushing the excess metal of weld. The carbons, with grooves comparison with the ones without grooves, have layer copper coated surface which result in greater electrical conductivity and can be used for automatic manual gouging to reduce stub loss.
Description:
Gouging carbon is used for cutting and boring, removing of defects in welds and casts, grooving on the back of weld and flushing the excess metal of weld. The carbons, with grooves comparison with the ones without grooves, have layer copper coated surface which result in greater electrical conductivity and can be used for automatic manual gouging to reduce stub loss.
Use:
Arc air gouging carbon electrode is well applied in gouging low-carbon steel, cast, stainless steel, copper in wide ranges, such as shipbuilding, casting, boiler-making, pressure vessel, etc.
Arc air gouging carbon electrode is well applied in gouging low-carbon steel, cast, stainless steel, copper in wide ranges, such as shipbuilding, casting, boiler-making, pressure vessel, etc.
Arc air gouging carbon electrodes show the following advantages:
1 high efficiency
2 low noise
3 smooth plane
4 economic cost
5 high endurance
6 broad application
Pointed gouging electrode:
Model
|
DiaxLength
|
Current
Range(A) |
Regular
Apply |
|
mm
|
inches
|
|||
P504
|
4x305(355)
|
5/32x12" (14")
|
150-250
|
For gouging, cutting and boring
|
P505
|
5x305(355)
|
3/16x12" (14")
|
150-250
|
|
P506
|
6x305(355)
|
15/64x12" (14")
|
200-300
|
|
P506.5
|
6.5x305(355)
|
1/4x12" (14")
|
300-400
|
|
P507
|
7x305(355)
|
9/32x12” (14")
|
300-400
|
|
P508
|
8x305(355)
|
5/16x12" (14")
|
300-400
|
|
P509
|
9x305(355)
|
23/64x12" (14")
|
350-450
|
|
P510
|
10x305(355)
|
3/8x12" (14")
|
350-600
|
|
P512
|
12x355(510)
|
15/32x14" (20")
|
550-800
|
|
P513
|
13x355(510)
|
1/2x14" (20")
|
600-1000
|
|
P516
|
16x355(510)
|
5/8x14" (20")
|
800-1200
|
|
P519
|
19x355(510)
|
3/4x 14" (20")
|
120-1600
|
Flat gouging electrode:
Model
|
DiaxLength
|
Current
Range(A) |
Regular
Apply
|
|
mm
|
inches
|
|||
F5510
|
5x10x305(355)
|
3/16x25/64x12"(14")
|
320-380
|
Excellent for cutting, removing of weld and castings crowns. Repairing or making dies.
|
F5512
|
5x12x305(355)
|
3/16x15/32x12"(14")
|
320-380
|
|
F5515
|
5x15x305(355)
|
3/16x19/32x12"(14")
|
350-450
|
|
F5520
|
5x20x305(355)
|
3/16x25/32x12"(14")
|
400-500
|
|
F5525
|
5x25x305(355)
|
3/16x63/64x12"(14")
|
450-550
|
Jointed gouging electrode:
Model
|
DiaxLength
|
Current
Range(A) |
Regular
apply |
|
mm
|
inches
|
|||
J510
|
9.5x430
|
3/8 x17"
|
350-450
|
Ideal for either automatic or manual torch applications. Continuous electrode feed eliminates stub loss
|
J511
|
11x355(430)
|
7/16x14" (17")
|
500-700
|
|
J513
|
13x355(430)
|
1/2 x14" (17")
|
600-1000
|
|
J516
|
16x355(380)(430)
|
5/8 x14"(15") (17")
|
800-1200
|
|
J519
|
19x355(380)(430)
|
3/4 x14"(15") (17")
|
1200-1600
|
Our carbon electrodes are produced according to exacting standards authorised and monitored by our personnel. Please contact us with your requirements. We will make a better supplier with quality products and services.