Item description: 350ml double koubei
Size: diameter 8 * high 9.6 * handle wide 11.5
Material: ps
Color: orange yellow, blue, green
Capacity: 350ml
Weight: 0.1 kg
Item no: jx - 70001
|
Name
|
plastic injection mould
|
|
Mould material
|
45#, 50#, P20, H13, 718, 2738, NAK80, S136, SKD61 etc.
|
|
Mould base
|
LKM, HASCO ect.
|
|
Cavity
|
Single/multi.
|
|
Runner
|
Hot/cold.
|
|
Design software
|
UG, PROE, CAD, ect.
|
|
Plastic material
|
PP, PC, PS, PE, PU, PVC, ABS, PMMA ect.
|
|
Mould life
|
300,000-3,000,000 shots.
|
|
Delivery time
|
15-60days.
|
|
Specification
|
Depends on customers’ requirements.
|
We can supply both mould and product
Taizhou huangyan new visual plastic mould Co., LTD
Mold production concept and standards
A. Mould appearance, appearance and related standards
1: mold size meets customer requirement, meet the customer designated injection mahine.
2; Customer nameplate production, (mould Numbers, mould weight, mould shape dimension, production start time fixed installation rivet, position conform to the standard.
3; Positioning circle size meet specifications, well above the roof 10mm, installation shall sink in the fixed board, may not directly posted on template, use 2 above the screw.
4; Runner spherical R complies with the standards and runner set of R > molding machine R
5; Gate sets and port surface polishing to 600 # sandpaper above, avoid edges.
6; Formwork each template in days side hit bottom autumn-from blunt mold Numbers; Template Numbers A0, B0; Inlet and outlet water mark IN, OUT; Connect line mark l.; Mark O IN oil, O OUT IN; All ZiMa conform to the standard. Mould looks bad word, arrows "UP" made in accordance with the customer's request
7; Mould to side to protect the underside, install foothold without special circumstances can junk nails instead.
8; Large-scale die (8 tons), mould clamping need to open u-shaped slot or perforation, and molding machine fixed location corresponding.
9; Formwork surface may not have indentation, rust, redundant unused rings, inlet and outlet water, gas, oil hole affect the appearance and so on and other defects.
10; Formwork, pore bits, each plate should be greater than 1.5 edges edge for chamfering mm. Except special positions.