Product Main

Specifications

Dreambox 800 DM800 HD  High Definition Satellite Receiver PVR
Technical Features
 
  •  300 MHz MIPS Processor
  •  Linux Operating System
  •  OLED - Display
  •  MPEG-2 / H.264 Hardware decoding
  •  Tuner: DVB-S, optional: DVB-C, DVB-T
  •  Tuner Module, Plug&Play
  •  1 x Smartcard-Reader (Dreamcrypt CA)
  •  V.24/RS232 Interface
  •  10/100Mbit Ethernet Interface
  •  1 x Scart (RGB, FBAS or S-Video)
  •  DVI
  •  2 x USB 2.0
  •  analog modem
  •  S/PDIF Interface for digital bit stream out (AC-3)
  •  64 MByte Flash, 256 MByte RAM
  •  SATA
  •  for use either as internal SATA HDD 2,5“
  •  or to use for external eSATA 
  •  unlimited channel lists for TV/Radio
  •  channel-change time < 1 second
  •  automatic service scan
  •  directly bouquet-lists
  •  EPG (electronic program guide)
  •  multiple LNB-Switching control (supports DiSEqC)
  •  OSD in many languages and skin-support
  •  Videotext Decoder
  •  extern 12V power supply
  
DreamBox DM 800 HD PVR technical data  
 
DBS-Tuner mit DVB-S2:
Frequency Range  950 .... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink
Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS, RGB, S-Video
Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware
Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware
Analoge modem:
analoge modem for Internet connection
SATA Interface:
   - for use either as internal HDD 2,5“ or eSATAor internal 2,5" HDD
USB
2 x USB 2.0 Host
LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
Count of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)
Power consumption:
< 15W at 12V
External PSU
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 3,0A
Physical specification:
Ambient Temperature +15°C...+35°C
Humidity < 80%
Size (W x D x H): 195 mm x 140 mm x 40 mm
Weight: 1,8 kg  without HDD