1) Fault self testing and alarm indicator function make user to use and maintain  

2) If not receiving turnstile open signal, brake lever will lock automatically. 

3) Automatic reset, after open turnstile, system will automatically cancel users’authority to pass if they do not pass within defined time.
4)Receiving relay signal (default) or 12V level signal  

5)Automatic reset after delayed time, the standard is that turnstile will automatically self reset  

 

2, Packing list

◇Standard box:  1
◇Brake lever: 1
◇Controller: 1

◇Motor: 1
◇Chassis and and gearing part: 1

◇RS485 turnstile access control: 1

Note: RS485 turnstile access control: 30000 users, 60,000 events.

3.Parameters
◇Box material: 304# stainless steel

◇Box size: 1200*280*980mm

◇Pole: 500mm
◇Pole length tolerance max.: 80Kg

◇Life: 2 million times
◇Pole work driving force: 3Kg
◇Pole transmission way: Digital
◇Pole moving direction: single directional or bio-directional passing ( optional), we can realize 3   kind of ways: turnstile entry or exit by swiping cards, or one side by reading card and the other side by cut-off line,  or one side by swiping card, the other side by free passing.  
◇Automatic reset, after open turnstile, system will automatically cancel users’authority to pass if they do not pass within defined time. The passing time can be set.

◇LED indicator: passing direction indicating

◇Motor: 24V /20W brushless motor
◇Use optical hold work theory, there is no delay requirement of input control signal

◇Voltage: AC220 ±10% V/50 ±10% HZ

◇Input interface: dry contact as default or 12V level signal with pulse width>=200ms, driving current>=10ma

◇Turnstile open, close time: 1-2 sec.

◇Time need to enter into passing status after being powered

◇Automatic reset time after being fault:  

◇Working environment: Indoor and outdoor

◇Temperature: -40℃—— 80℃ Humidity: 5％—— 90％

◇Emergency: Turnstile automatically drops after power off.