1,Features

1)Fault self testing and alarm indicator function make user to use and maintain

2)Control software built in control panel, we can adjust barrier parameter to make it to work any kinds of places.  

3)If not receiving turnstile open signal, brake lever will lock automatically.

4)Anti-pinch and anti-bumps, if there is resistance during arm’s swing, barrier will stop working within defined time, and the strength will be very small. After no resistance, barrier will come back to normal position.   

5)Arm swing speed can be adjusted with rate 1—10.

6) Automatic reset, after open turnstile, system will automatically cancel users’authority to pass if they do not pass within defined time.

7)Free adjust barrier’s NO or NC after power off

8)Working mode: entry or exit by swiping card, single way by swing card and the other side by passing free.

9)Connecting many kind of card reading devices like EM, Mifare, HID, fingerprint....

10)Automatically come back to normal status after delay, the standard is 5 sec. after opening.

11)Infrared reset function which can check if barrier is open or close to prevent from rushing in and tagging along. 

11)Extend sound alarm
 

2.Packing list
 

◇Box: 1

◇Swing arm: 1

◇Control panel: 1

◇Transformer: 1

◇Motor: 1

◇Chassis:1

3.Prarameter
◇Box material, full stainless steel 304#

◇Size: 1200*280*980(MM)

◇Arm length: 500mm: 500mm
◇Arm swing angle: 180 degree or 90 degree

◇Swiping direction: Single or 2 ways

◇Anti-pinch and anti-bumps

◇Infrared switch +delay reset  
◇Working voltage: AC220 ±10% V/50 ±10% HZ

◇Input interface: Dry contact

◇Card reader: 2

◇Passing speed: 40 people/min(NO), 25-30 people/min(NC)

◇Barrier open or close time: 0.5—1 sec.

◇Time needed to enter into passing status after power on: 2 sec.

◇Time for automatically come back to normal: 10 sec.

◇Working environment: Indoor or outdoor

◇Temperature: -40℃—— 80℃ humidity: 5％—— 90％ф