This CAR series high temp heat pump is special for supply hot water of 70DegC. normal heat pump it can get of 55-60DegC, so If you need high temp hot water, this series heat pump will be your best choice!
An air source heat pump uses outside air as a heat source or heat sink. A compressor, condenser and refrigerant system is used to absorb heat at one place and release it at another.
1 Pressurized system design to keep hot water at consistant temperature all the time.
2 100% water circulation of the air source heat pump design
3 Electric protection class IPX4
System introduction
1 Scroll compressor inside.
2 Compact structure, easy demountable for access.
3 Environment friendly refrigerant of R417A is available.
4 Intelligent controller adjustment by quickmind microprocessor.
5 Four way directional valve.
6 Careful protections like high/low pressure protection, water flow switch protection, overheating protection, overload protection and so on.
7 Fault self-checking function.
8 Automatic defrosting and antifreezing function.
Technical Parameters:
|
CAR-HB
|
|
CAR-20
|
||
|
Outlet water temperature
|
°C
|
70°C
|
||
|
Rated heating capacity
|
KW
|
13.4
|
||
|
BTU
|
45721
|
|||
|
Rated heating input power
|
KW
|
4.15
|
||
|
Rated heating input current
|
A
|
7.6
|
||
|
COP
|
|
3.2
|
||
|
Power Supply
|
V/Hz
|
380V/3N/50HZ
|
||
|
Noise
|
dB(A)
|
58
|
||
|
Unit size
|
W*D*H
|
mm
|
810*780*1050
|
|
|
Package size
|
W*D*H
|
mm
|
970*880*1220
|
|
|
Package
|
|
Qualified plywood case, no need of fumigation
|
||
|
Unit weight
|
KG
|
155
|
||
|
Working temperature range
|
°C
|
‘-20°C~43°C
|
||
|
Throttling type
|
|
Electronic /thermostatic expansion valves
|
||
|
Refrigerant type
|
|
R417A
|
||
|
Compressor
|
Type
|
|
Copeland, Sanyo, Daikin optional
|
|
|
Quantity
|
pcs
|
1
|
||
|
Security functions
|
|
Built-in overheating protection, phase order protection, under-voltage protection and time delay protection.
|
||
|
Air source heat exchanger
|
Type
|
|
Finned heat exchanger
|
|
|
Motor power
|
KW
|
0.3
|
||
|
Hot water side heat exchange
|
Type
|
|
Efficient tube in tube heat exchanger
|
|
|
Water flow
|
m3/H
|
2.3
|
||
|
Water pressure down
|
kPa
|
18
|
||
|
pipe size
|
DN
|
25
|
||
|
water side max working pressure
|
kPa
|
1000
|
||
The test conditions of above parameter:
Air source side dry bulb temp is 20°C. wet buld temp is 15°C. Hot water side inlet water beginning temp is 20°C and ending temp is 70°C.