model: series 2-WE67K
1 The frame of machine is composed of tank, worktable, left and right housings and ram. So it has high strength and good rigidity. Also it takes vibration to eliminate stress.
2 Synchronization working principal of both machines: Adopting electric-hydraulic proportional valve to ensure the synchronization of both machines. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to inspect the position of ram continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to C plates, not on housing plates directly, the deflection of ram and frame when working will not effect its measuring and controlling precision. When two machines working together, the differential potentiometer installed between two machines will transfer the mechanic synchronizing signal into electronic one and feed back to synchronization plate and control system. The signal will be enlarged by BOSCH amplifier to control the synchronization of both machines by controlling electric-hydraulic proportional valve. So the synchronization of two machines is achieved with high precision.
3 Through computer, the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point. The strokes (Y1, Y2) of ram could make a small tilt to meet the special requirement of user.
4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job.
5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.

model	Nominal pressure (KN)	Length of table (mm)	Distance between housings (mm)	Throat depth (mm)	Stroke of ram (mm)	Strokes of ram (mm)	Max. open height (mm)	Main motor (kw)	Weight (kg)	Overall dimensions
2-WE67K-320/6000	3200	6000	4800	720	250	≥1.5	870	22	33000	2x6150x2614x5470
2-WE67K-600/6000	6000	6000	4800	1000	320	≥1.5	1000	45	6200	2x6080x4435x7300
2-WE67K-800/6000	8000	6000	4800	1100	350	≥1.5	1100	55	8500	2x6100x6915x5400
2-WE67K-1000/6500	10000	6500	4880	1400	400	≥1.5	1400	55	125000	2x6500x7935x6900
2-WE67K-1200/7000	12000	7000	5600	1600	450	≥1.5	1800	75	145000	2x7100x8535x7500
2-WE67K-1600/9000	16000	9000	6500	1100	450	≥1.5	1250	2x55	170000	2x9100x8200x8250