CP01/PDU
Application range
CP01/PDU series socket power lightning protection device are applicable to the front side of various terminal consumer equipment of AC not more than 220V and rated current less than 10A providing protection against overvoltage arising from lightning to the power supply line and misoperation option from standard IEC61643 1 and GB50343
Main features
☆ High current capacity, low residual voltage
☆ Modularized design standard socket design convenient for installation and use
☆ Introducing multilayer protection technology strong protection ability high reliability.
☆ Build in temperature fuse safe and reliable.
☆ Red pilot lamp on indicate normal off indicate invalid
Main technical data
|
Type
|
CP01-6
|
PDU-6
|
|
Rated working voltage Un V
|
220
|
220
|
|
Max. continuous Voltage Uc V
|
320
|
320
|
|
Voltage protection level Up V
|
＜1.3
|
＜1.5
|
|
Rated working current Ie A
|
10A
|
|
|
Norminal discharge current In (8/20μs) kA
|
5
|
|
|
Max. Discharge current Imax (8/20μs) kA
|
10
|
|
|
Connection mode
|
Standard GB three-position socket
|
|
|
Response time
|
<25ns
|
|
|
Enclosure material
|
enhanced flame retardant nylon (flame retardancy:V0)
|
|
|
Response time
|
<100ns
|
|
|
Method of installation
|
35mm standard DIN rail installation
|
|
|
Cross-sectional area
|
≥2. 5 mm 2 stranded/ flexible
|
|
Installation instruction
1. The protector connected in parallel between the power channel and the protected device
2. Connect the input terminal to the power wire or insert the input terminal into the power socket, and then insert the power wire of protected device into socket make sure the reliable connection
3. Connect the earthing wire of the protector to the equalizing ring of the lightning protection system
4. If the red indicator light on after circuit be electrified. The lightning protection work is normal