Heat-Resistant ST1000 Steel Cord Conveyor Belt For Extreme Loads in Open-pit and Underground Mining
1 Conveyor Belt Cover compounds: General, Abrasion-resistant, Heat-resistant, Cold-resistant, Fire-resistant and Chemical-resistant.
2 Standards offered: GB/T9770, DIN22131, EN ISO 15236, SANS1366 and AS1333.
Characteristics:
1. High tensile strength: The belts are suitable for large span , long distance transportation of materials
2. Small elongation in use: The belts need only a very short take-up stroke distance.
3. Small diameter of drive pulley: The belt body has a layer of longitudnally arranged steel cords as its skeleton, and thus is flexble and fatigue - resistant. Therefor, drive pulley of smaller diameter can be used to make the equipment smller.
4. High adhsion between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber has the property of good adhesion with steel cords , Therefore the rubber is tightly adhered to the steel cords that is shock resistant and hard to peel off, which make the belt long life.
5. Even tension of steel cords: Out of our advanced techniques in manufacturing , the steel cords are very equably arranged and have the same tension ,so the belts are well balanced in running and difficult to run away.
6. Good throughability: As the belt body has no transverse skeleton, it is easy to form a deep trough , so the belts can load more materials and prevent the materials from escaping.
7. Inspection of the belt with X-rays: Users can use X-rays to inspect damages of the skeleton , the steel cords onthe conveyor machines to prevent accidents.
2. Small elongation in use: The belts need only a very short take-up stroke distance.
3. Small diameter of drive pulley: The belt body has a layer of longitudnally arranged steel cords as its skeleton, and thus is flexble and fatigue - resistant. Therefor, drive pulley of smaller diameter can be used to make the equipment smller.
4. High adhsion between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber has the property of good adhesion with steel cords , Therefore the rubber is tightly adhered to the steel cords that is shock resistant and hard to peel off, which make the belt long life.
5. Even tension of steel cords: Out of our advanced techniques in manufacturing , the steel cords are very equably arranged and have the same tension ,so the belts are well balanced in running and difficult to run away.
6. Good throughability: As the belt body has no transverse skeleton, it is easy to form a deep trough , so the belts can load more materials and prevent the materials from escaping.
7. Inspection of the belt with X-rays: Users can use X-rays to inspect damages of the skeleton , the steel cords onthe conveyor machines to prevent accidents.