injection molding machine features:
1.vertical clamping with vertical injection.small occupation,suitable for insert molding.
2.computerized LCD monitor NC control system,easy to maintain and operate the machine.
3.applied for genery plastic or engineering plastic.
4.applicable for injection of power cord plug,electric plugs,electronic parts,computer parts,auto parts,sunglasses frame,hardware,screwdriver,plastic fork/knife,plastic dishware,ball-point pen etc...
specification:
machine type | unit | HF-30/200 |
screw diameter | mm | 20 |
injetion pressure | kg/m2 | 1700 |
thecretical volume | cm3 | 38 |
Max.shot weight(ps) | g | 30 |
injection rate | cm3/sec | 20 |
screw stroke | mm | 20 |
screw speed Max. | rpm | 0-200 |
nozzie contact force | tons | 1.5 |
nozzie retraction stroke | mm | 85 |
number of trmperature control | - | 2 |
meterial hopper capacity | L | 20 |
clamping force | tons | 20 |
opening force | tons | 7 |
platen size | mm | 430*320 |
distance between tie bare | mm | 250*250 |
Min.mold height | mm | 40 |
opening stroke | mm | 160 |
Max.open daylight | mm | 260 |
ejector force | tons | 1.2 |
ejector stroke | mm | 50 |
slide stroke | mm | - |
Max.mold weight | kg | 70 |
station clearance | mm | - |
Max.hydraulic pressure | kg/cm2 | 148 |
pump output | liters/min | 19 |
oil reservoir capacity | liters | 80 |
cooling water consumption | liters/hr | 400-600 |
pump motor power | kw | 2.2 |
barrel heating power | kw | 250*250 |
total wattage | kw | 4.2 |
machine weight | tons | 0.71 |