Product Main

Specifications

Plastic Injection Molding Machine Details
Adopt one up mold and two down molds, high capacity.
LCD computer control system, easy operation.
Suitable for car parts(air filter etc), electronic parts, tooth brush, toothpaste, cosmetic etc.
Machine type unit HF-DM/300 HF-DM/400 HF-DM/600 HF-DM/850 HF-DM/1200 HF-DM/1600 HF-DM/2000
screw diameter mm 30 35 40 45 50 55 60
injetion pressure kg/m2 1395 1742 1220 1064 1263 1425 1866
thecretical volume cm3 71 98 176 289 353 522 678
Max. Shot weight(ps) g 64 85 160 250 320 463 610
injection rate cm3/sec 50 52 90 167 177 193 212.5
screw stroke mm 100 120 140 140 180 220 240
screw speed Max. Rpm 0-200 0-200 0-190 0-200 0-200 0-200 0-160
nozzie contact force tons 2 2.4 2.6 2.9 3.3 4.2 6
nozzie retraction stroke mm 140 180 200 220 300 300 300
number of trmperature control - 3 3 4 5 5 5 5
meterial hopper capacity L 20 30 30 30 30 30 30
clamping force tons 30 45 60 85 120 160 200
opening force tons 7 7.5 13.5 10.5 15 20 26
platen size mm 520*370 580*430 650*490 740*500 840*500 950*700 1200*920
distance between tie bare mm 355*205 400*250 500*340 560*320 620*280 750*500 870*610
Min. Mold height mm 100 150 200 5200 200 250 300
opening stroke mm 180 200 200 250 250 300 350
Max. Open daylight mm 260 350 400 460 500 550 650
ejector force tons 1.2 1.3 2.1 3.5 3.5 4.8 4.8
ejector stroke mm 50 70 70 75 75 750*500 75
slide stroke mm 350 420 500*340 500 540 700 885
Max. Mold weight kg 160 180 200 250 300 380 450
station clearance mm 0.02 0.02 0.02 0.02 0.02 0.02 0.02
Max. Hydraulic pressure kg/cm2 140 148 148 148 148 140 175
pump output liters/min 26 39 47 76 96 118 136
oil reservoir capacity liters 80 130 150 180 200 350 410
cooling water consumption liters/hr 400-600 600-800 800-1000 1200-1500 1300-1600 1700-1900 1800-2000
pump motor power kw 3.5 5.5 7.5 11 14.7 18.75 30
barrel heating power kw 2.7 3.5 4.5 5.6 7.5 10 14.3
total wattage kw 6.2 9 12 16.6 22.2 28.75 44.3
machine weight tons 1.51 1.84 2.61 4.8 5.4 6.1 6.5