2.Quality Assurance ( CE,CQC,GMP,ISO,etc )
3.OEM acceptable
This equipment can execute automatically raising, clamping, blending and lowering tasks. One main machine can be configured with various bin specifications, so different batches and requirements for various blending can be satisfied, consequently it is considered as the ideal blending equipment in pharmaceutical industry. It is also widely used in chemical, foodstuff industries, etc.
This equipment is composed of frame, rotating cage; drive, lifting, brake and control systems. When operating, firstly, push the bin into the rotating cage and press “Confirm” key on the touch panel, the bin will be automatically raised in place and clamped. On reception of clamp signal by the sensors, the drive system starts blending task according to the set time and rotation speed. On reaching all the set parameters, the brake system operates automatically to stop the rotating cage in a horizontal position and the blending task is finished. Then, the lifting system works to lower the bin on the ground and on reaching that position, it stops automatically. Finally, data of this batch are printed. Move out the bin from the rotating cage to transfer it for the next process.
This equipment is successfully designed on the basis of a wide research, absorption and digestion of foreign advanced models. It has a reasonable structure with stable performances and easy operation; the whole machine has no dead angle or exposed screws. Structural characteristics of this equipment are: the rotating cage is tilted 30° as compared with the rotation axis, the materials perform a double movement inside the bin: a constant and intense turn over following the frame rotation and also a relatively high tangential motion along the bin wall to realize an optimal blending effect and result. PLC, also infrared safety device and a device avoiding misoperation of butterfly valve are designed to ensure a fully automatic control and a safe production. All processes of the materials are finished in a same container without frequent materials transfer, charging and shift. Consequently, powder dust or cross pollution are effectively controlled to reduce materials losses, and on the other hand, an effective control of materials layers is achieved. Finally, the production process has been greatly optimized. HDD Series Bin Blender, single arm comply entirely with GMP requirements for medicine production.