30-1
Product introduction
1.Become flocculant in high speed , big block ,high activity and rapid sedimentation analysis.
1.Become flocculant in high speed , big block ,high activity and rapid sedimentation analysis.
2.It doesn't need other accessory ingredients and use less dosage than other unorganic coagulating agents and has lower cost for treatment water.
3.It has wide range PH value and strong adaptability and good effect for high turbid and high temperature organic contaminated water and lowly turbid low--temperature or ganic continue-aminated water.
3.It has wide range PH value and strong adaptability and good effect for high turbid and high temperature organic contaminated water and lowly turbid low--temperature or ganic continue-aminated water.
Product Details:
|
AL2O3 content/%≥
|
30
|
|
basicity%
|
40-90
|
|
Density(20°C)/(g/cm3)≥
|
1.12
|
|
Water insoluble content /%≤
|
1.0
|
|
PH(1% aqueous solution)
|
3.5-5.0
|
|
arsenic(As) content%
|
0.0002
|
|
Ammoniacal nitrogen(N)content %≤
|
0.01
|
|
lead(Pb)content%
|
0.001
|
|
cadmium(Cd)content%
|
0.0002
|
|
mercury(Hg)content %
|
0.00001
|
|
hexavalent chrome(Cr6+)%
|
0.0005
|
Application
1.Tap water,life sewage
2.Various industrial waste water.
3.Tannage and cloth cockling-prevent
4.Cement Solidifying, and moulding
5.Refining of pharmaceuticals, glycerine and sugar
6. Catalyzer carrier
7. Paper-making glue
7. Paper-making glue
Packaging and storage :
1, Lined with plastic bags, with outer surface of plastic film woven bag, each bag weighs about 25kg.
2, Stored in a cool and dry place to prevent the sun and rain.
1, Lined with plastic bags, with outer surface of plastic film woven bag, each bag weighs about 25kg.
2, Stored in a cool and dry place to prevent the sun and rain.
Cautions:
1.This product mustn't be stored together with other chemical reagents.
2.Solid products should be stored in a ventiated and dry place with the storage period of two years,and the availability won't be changed after the product is affected by damp.
1.This product mustn't be stored together with other chemical reagents.
2.Solid products should be stored in a ventiated and dry place with the storage period of two years,and the availability won't be changed after the product is affected by damp.