VSGB-460/660A Small Automatic UV Coater
Applications and Characters:
VSGB-460/660A Small Automatic UV Coater is a new model developed and designed by our company and the American company Gala Coating. The machine features easy operation and outstanding performance. It is applicable to small format printed paper sheets coating and curing with UV or Water-base varnish.
1. Equipped with automatic paper feeder and stacker.
2. Equipped with UV curing and IR drying device.
3. Large diameter coating rollers makes the coating effect smoother and brighter.
4. Full coverage splash guards to protect from splashing.
5. Used vacuum airbed for maximum hold down the paper sheets on conveying.
6. UV magnetic leakage transformer with parallel capacitor design can better endure the voltage fluctuating impact.
7. Two level UV lamp power setting.
8. Easy access UV lamp chamber and replacement.
9. High velocity blower fan for cooling and exhaust.
10. Safety locker on all machine doors and covers.
11. Full coverage protection against UV radiation around the UV lamp chamber.
12. Lower temperature control on the UV lamp chamber surface.
13. Emergency stop switches at arms length throughout the machine .
14. Interlocks design prevents against misoperation.
Main Specification:
|
Model
|
VSGB-460A
|
VSGB-660A
|
|
Max. Sheet Size
|
430×650 mm
|
630×650 mm
|
|
Min. Sheet Size
|
210×297 mm
|
210×297 mm
|
|
Sheet Weight
|
150~500 g/m2
|
|
|
Speed
|
0~40 m/min
|
|
|
Power
|
10.9Kw
|
13.3Kw
|
|
UV Lamp
|
1pcs × 5.0Kw
|
1pcs × 6.5Kw
|
|
IR Lamp
|
3pcs × 0.9Kw
|
3pcs × 1.2Kw
|
|
Weight
|
1155 kg
|
1450 kg
|
|
Dimension
|
4500×980×1230 mm
|
4500×1180×1230 mm
|
|
Options
|
Model
|
Application
|
|
Touch Screen Control Panel
|
VSGB-460/660-TP
|
PLC control with touch screen
|
|
Simple Air Knife (Constant blow)
|
VSGB-460/660-SAK
|
Suitable for Min. 120 g/m2 sheets
|
|
EM Air Knife (non-constant blow)
|
VSGB-460/660-EAK
|
Suitable for Min. 100 g/m2 sheets
|
|
UV Warming System
|
VSGB-460/660-WS
|
Reduce UV varnish viscosity
|
|
Sheets Counter
|
VSGB-460/660-SC
|
Preset qty & buzzer reminding
|
1. Touch Screen Control Panel: PLC control with touch screen, easy operation and more directly. When fault happens, it will alarm automatically and find out the fault cause quickly. On the touch screen, working status of the machine can be checked at any time. The standard machine use some buttons and switches to operate.
2. Simple Air Knife: The option is composed of some simple wind nose, it blow Air constantly, only suitable for Min. 120 g/m2 sheets paper.
3. EM Air Knife: The option is composed of PLC Control, Encoders, Solenoid Valves, 2 PCS Air Pumps, an exhaust nozzle, 2 PCS Photo-electricity Sensors and Vaccum Suction Chamber which can achieve continuous and jog-style inflation. When feeding the paper to the first Photo-electricity Sensor, after the PLC getting this signal, the Air Knife System will start to blow air, this can make the paper difficult to be sticked on the rubber roller and can do about 100 g/m2 sheets paper. Please kindly check the attached pictures for the Air Knife.
4. Sheets Counter: This system is used to preset the amount of paper, it is more general configuration in the fully automatic machine, when the user set the quantity what they need, the alarm will beep to remind the operator when reach the quantity, so it can save a lot of time to sort products.
UV Warming System: This system is used to reduce the viscosity of the UV oil and increase liquidity of the UV coating on the paper surface, thereby enhancing the beauty of the surface of the paper, usually for a relatively low temperature region.