Features for Inline Round Dripper Mould with Cold Runner:
1. The mould adopts cold runner system, usually with 16 cavities or 24 cavities.
2. The cavity board can be changeable, thus producing inline drippers with different flow rates.

3. The mould adopts S136H (HRC48-50) as cavity insert material and Japan Punch steel as mould core, which can ensure lifespan beyond one million shots.

4. The machining accuracy for the mould can reach 0.01mm, and roughness as Ra 00.8.

5. The dripper manufacture deviation Cu is less than 1%.

6. The deviation factor for dripper flow rate is less than 5%.

7. Mould is designed with 2D/3D drawing

8. Moulds can be designed according to clients’ request to dripper flow rate, diameter and length.

9. Mould base brand is LKM from Shanghai

10. Mould shot period is 15 to 20 seconds.

11.Water circulation is used for the mould cooling.