Zhengzhou Dearye Heavy is a special manufacturer of AAC plant, including annual output 50000-300000m3, We also supply design, installation, technical training and so on. Welcome to consultation and purchase.
1.       The automatic feed proportioning system will proportion raw materials as slurry according to certain proportion

2.       Pour into the pouring machine, add foaming agents and fixing agents

3.       Pouring

4.       Action under certain temperature and time

5.       After green bricks reach certain hardness, use reversal sling t o life molds and green bricks for overturn by 90 degrees in the air

6.       One side of the mold will become the bottom supporting the semi-finished products, which will be lifted onto the larry or the cutting support for die-sinking.

7.       Turn off the mould frame and side plate returned, reform the mold and wait for oil painting and re-pouring, the green bricks will be cut in six sides on the cutting machine: cut vertically the two sides of the green bricks.

8.       Cut longitudinally

9.       Cut horizontally

10.   After cutting, lift the semi-finished products and back plate to the larry

11.   Group and place into autoclave for action

12.   Action under high temperature

13.   Out of the autoclave after action

14.   Lift the finished products to the storage

15.   Load and package

16.   Return side plates