Introduction of Suspension Eot Crane
1.Suspension overhead crane equipped with CD1 or MD1 electric wire rope hoist.
2.Underslung overhead crane is a light duty track traveling crane with trajectory which applies to and used at machinery assembling sites and warehouse.
3.This product adopts groud controlling and works at a temperature of -25~40 centigrade. 4.Underslung overhead crane is prohibited to use the equipment at combustible, explosive or corrosive encironment!
2.Underslung overhead crane is a light duty track traveling crane with trajectory which applies to and used at machinery assembling sites and warehouse.
3.This product adopts groud controlling and works at a temperature of -25~40 centigrade. 4.Underslung overhead crane is prohibited to use the equipment at combustible, explosive or corrosive encironment!
Safety guarantee of Suspended Eot Crane
1.All the cranes are equipped with overload protection device, Top quality long time bearing polyurethane materials buffer, Crane traveling limit switch, Voltage lower protection function, Emergency stop system and so on.
2.All operations are controlled by central control system
Technical data
Other notes
Technical data
| Capacity | 5t | ||||
| Span | 15m | ||||
| Control type | Wired Pendent handle button(groud) | ||||
| Crane Travelling Mechanism | Working Speed(m/min) | 20 Ground | |||
| Speed Ratio | 58.78 | ||||
| Motor | Type | ZDY21-4 | |||
| Power kw | 2*0.8 | ||||
| Rotational Speed | 1380r/min | ||||
| Electric wire rope Hoist | Model of Electric Hoist | CD1 Model | |||
| Lifting Speed (m/min) | 8 | ||||
| Lifting Height (M) | 10 | ||||
| Cross travelling Speed | 20 | ||||
| Motor | Cone Squirrel-Cage Model | ||||
| Working duty | Intermediate Jc=25% A3 | ||||
| Electric Current | 380 V 50 Hz Three-Phase | ||||
| Wheel Diameter | φ270 | ||||
| Width of Trail | 37-70 | ||||
| Dead weight | 4.19Ton | ||||
Control method:
Pendent line with press button or remote control or both
Painting:
Primer and finishing paint ,anti-rust painting
Color:according to your demand.
Average thickness: about 100 microns( above 120 microns.(according to your demand).
Surface treatment: Sand blasting
Other notes
| Minimum Order Quantity: | one set or Negotiable |
| Port: | Qingdao/Tianjin port,China |
| Packaging Details: | Wooden crates |
| Delivery Time: | Shipping within 30 days after your 30% advanced payment |
| Payment Terms: | L/C,T/T |
| Supply Ability: | 5000 sets per Month |
| Warranty: | 12 months |
| After sales service: | could send professional engineers to guide technical installation |