OBD Smart(IDD-212G) is an onboard diagnotic device that is designed to monitor vehicle emissions and diagnose various types of vehicle data. By integrating a GSM module and G-mouse, data can be transmitted to remote servers for storage and analysis.
Additionally, real time tracking and positioning function are supported as well.
Additionally, real time tracking and positioning function are supported as well.
Features:
- Compact design, plug and play;
- On-board audio alarm for fault notification;
- Built-in memory, 300 hours data storage on-board and unlimited data storage space on remote server;
- Built-in 3 axes acceleration G-Sensor module for illegal towing alarm ;
- Compatible with all cars that support OBD II standard protocol;
- Support user application updating by both wireless network and COM port.;
- Built in GSM module and GPS module for real time monitoring and remote data transmission;
- Information can be remote transmitted to the cell phone via GPRS;
- Automatic enter into power saving state after ignition off, automatic wake up when ignition on.
- RECORDER function-DTC(Diagnostic Trouble Codes)scanner
- Anti-theft
- Driving behavior analysis-safety driving analysis and economy driving behavior analysis
- GAUGE vehicle meter recording function
- Remote monitoring of vehicle emissions
*The above features require optional accessories!
|
Item
|
Unit of measurement
|
Remarks
|
|
Engine speed
|
RPM
|
Accurate to 1RPM
|
|
Intake air pressure
|
MAP
|
√
|
|
Caused by air temperature
|
CIA
|
Accurate to 1℃
|
|
Launched from the load
|
LOD
|
√
|
|
Throttle Position
|
TPS
|
√
|
|
Fuel pressure
|
FRP
|
√
|
|
Ignition timing
|
ING
|
√
|
|
Battery voltage
|
VLT
|
Accurate to 0.1V
|
|
Fuel system status
|
LP
|
√
|
|
Water temperature
|
CWT
|
Accurate to 1℃
|
|
Speed
|
KPH
|
Accurate to 1KM/hr
|
|
Streamline fuel supply
|
||
|
Atmospheric pressure
|
||
|
Emission control efficiency
|
||
|
Air – fuel transfer rate
|
||
|
Deceleration point of collision
|
||
|
Oxygen sensor value
|
Remote control vehicle emissions:
OBD-Smart vehicle exhaust gas detection equipment
If the emission control system components related to aging or damaged for testing.
Alarm device to alert drivers to maintain and repair emission control systems.
Alarm device to alert drivers to maintain and repair emission control systems.
Using standard encoding, easy to read.
Testing include:
- CCM detection;
- catalytic detection;
- oxygen sensor detection;
- fuel to streamline testing;
- Steam control system test;
- exhaust gas return Circle detection;
- secondary air injection system testing
Platform software features:
Real-time monitoring of vehicle exhaust data, error type, time and circumstances.
On a regular basis to remind drivers to maintain records exhaust.
On a regular basis to remind drivers to maintain records exhaust.
OBD-Smart more features:
PC and wireless network set up by product parameters;
Easy to install, plug and play;
Automatic data storage, backup, data is not lost;
Data in the device can store 500 hours of data server with unlimited storage space
Turn off automatically after a power-saving mode;
Wake up automatically when the ignition.
Using standard encoding, easy to read.
-
Electrical parameters
Working voltage: DC12V;
Power input: DC9 – 36V
Data transmission by: GPRS
GSM frequency: 800/900/1800/1900MHz quad band
Positioned by: GPS
Avg.working current: Standby working current: Working temperature: -30℃ – +70℃
Storage temperature: -40℃ – +85℃
Relative humidity: 20% – 80%
Protection class: IP30 -
GSM/GPRS parameters
GSM module: Telit
GSM/GPRS receiving frequency: 850/900/1800/1900MHZ quad-band GSM frequency
Network communication protocol: Embedded-in TCP/IP protocol
Working voltage: DC3.4V – 4.2V(Recommend: DC3.8V)
GPS chip: SIRF StarIII
Channels: 20 Channels
Receiving frequency: 1575.42MHz
Cold start: approx 42s, typical TTFF(95%)
Warm start: approx 38s, typical TTFF(95%)
Hot start: approx 1s, typical TTFF(95%)
Antenna: built-in porcelain ANT