*CE Approval

*High Capacity

*High Quality and Lower Price

*Good Molding

 

Automatic Feeding Machine

This unit is used to realize the airflow conveying of granulated resin by means of the technology of low vacuum. It can be used with a hopper dryer to realize the dry material feeding automation.

 

Hopper Plastic Dryer

This machine can save energy by27-65%. It can avoid a second wet of granulated plastic after drying when directly linking the material inlet of the molding machine. Great in drying ability, and it can increase projecting speed rate. The quality of finished products can be improved.

 

 

Extruder

This line is composed of the SJ series single screw extruder. This series extruder is developed with German technology. Screw is separate type with mixing part. Barrel is grooved feed type with lengthened feeding part. This single screw extruder is mainly used to process PP, PE, PVC, ABS and other plastics. Equipped with auxiliary machines, it can manufacture profiles, sheets, granulations and other plastic products. It has the advantage of simple production technological process, high output, stable quality and low cost.

 

Mould

The mould shortens the injection cycle time, reduces the oil and power consumption. The mould is more safety and more environment-friendly, contributing to the directly increasing of the production efficiency by 20%.

 

Cooler

This product is mainly used for cooling plastic molds and oil tanks of infusion machine. Rapid cooling may greatly shorten work recycle time so that productivity and quality of plastic product can be increased. This machine is an essential facility for CT machine in hospital, chemical reaction pool, precise meter workshop, etc. It has applied imported full close compressor, the efficiency is rather high, cooling ability is rather strong. Automation level of this product is rather high, the structure is rather compact, the appearance is rather beautiful, it is convenient to use, it can save power.

 

Plastic blending machine

SH type plastic blending machine equipped with mixing vane is used to mix plastic raw material with high speed. It is mainly suitable for mixing all kinds of granulated plastic and is one of essential equipments for plastics injector and extruder. It is simple in structure, easy in operation even in mixing.

 

Plastic breaking machine

SWP Series Plastic Breaking is mainly used for breaking relatively long PVC special shaped material, such as plastic door, window, plastic pipe, sheet, etc. There is no need cutting. Once continuous feeding can be conducted. It is a new kind of breaking machine used for breaking plastic profiled material with large hardness and tenacity. It is improved and extended on the basis of SPW series breaking machine. Automatic feeding can be realized for these two models. Wind models. Wind motor is arranged for transport of broken material, start-up device is arranged. The operation, repair is rather simple. It is an ideal model for breaking all sorts of pipe material and profiled material.