1.Material:stainless steel plate






(3)Plate thickness:0.3-0.5mm
(4)Margin thickness:30*30mm
We can do according to your requirement.



4.Surface finish:galvanized



(1) metal protect horn corner construction by article without batten board, primary plasterer work can also make perfect corner straight line, shorten the construction time, effectively reduce the construction cost.Article
(2)metal protect horn punching and expansion two points, not only convenient nailing and make protect horn with edge horn parts of the article plasterboard or other binding materials with the more firmly.Article
(3)metal protect horn exact acute Angle size design, avoid the hit to the concentration of edge horn when stress, will force to the edge of the equably dispersed around the part, and effectively protect Yang Angle of intact.
(4) metal protect horn two-sided galvanized article using high quality materials, prevent ageing, corrosion resistance, prevent refractory rust.



Protect horn nets can be in the form LengXian plaster engineering on straight edge against broken or cracked, and protection and reinforcing the most vulnerable part of the plaster, the nets wing can LengXian any side of the firm into the uplift of the entire depth with plaster. Protect horn nets to plaster whitewash speaking is very important, because the building construction and completed the most easily when using plaster corner suffer damage, and because of its construction easy can save a lot of time.

If you have any another need, please contact us without hesitation, or you can visit our website. Your satisfaction is our mission.