Motion Sensor module
SB0081 is a pyroelectric sensor module which developed for human body detection. A PIR detector combined with a fresnel lens are mounted on a compact size PCB together with an analog IC and limited components to form the module. High level output of variable width is provided.
Specification:
Compact size (28* 28 mm)
Supply current: DC5V-20V (can design DC3V-24V)
Current drain :< 50uA
(Other choice: DC0.8V-4.5V; Current drain: 1.5mA-0.1mA)
Voltage Output: High/Low level signal:3.3V High level signal
(Other choice: Open-Collector Output)
TTL output can be directly connected to micro controller or logic device
High sensitivity
Delay time:5s-18 minute
Blockade time:0.5s-50s (acquiescently 0 seconds)
Operation Temperature: -15℃ -70℃
Infrared sensor:dual element, low noise, high sensitivity
Light sensor:CdS photocell (can be add as customer requirement)
SB0081 is a pyroelectric sensor module which developed for human body detection. A PIR detector combined with a fresnel lens are mounted on a compact size PCB together with an analog IC and limited components to form the module. High level output of variable width is provided.
Specification:
Compact size (28* 28 mm)
Supply current: DC5V-20V (can design DC3V-24V)
Current drain :< 50uA
(Other choice: DC0.8V-4.5V; Current drain: 1.5mA-0.1mA)
Voltage Output: High/Low level signal:3.3V High level signal
(Other choice: Open-Collector Output)
TTL output can be directly connected to micro controller or logic device
High sensitivity
Delay time:5s-18 minute
Blockade time:0.5s-50s (acquiescently 0 seconds)
Operation Temperature: -15℃ -70℃
Infrared sensor:dual element, low noise, high sensitivity
Light sensor:CdS photocell (can be add as customer requirement)