Led Strip Descriptions:

Product	LED Strip
Voltage	220V or 110V
Cut Length	1 meter
Power	14.4W/m
IP Grade	IP68
Light Source	SMD 5050
Chip Brand	Real Epistar
Packing	50m per reel
Free Accessories per carton	1pc power lead, 6pcs fixup clip, 2pcs connector, 1pc tail plug

 

LED Strip New Advantages:

1. Easy installation and save cost on power supply

2. Transparent PVC house, high transmittance, bent resistance

3. Flattening appearance, small volume New Package:50 meters per roll for SMD5050 strips, in an outer cartonAny length is available according to your requirement.

 

LED Strip New Installation:

1. Install:Take out the package; make sure it comes with necessary accessories, which include fixing clips, middle plugs, and end caps and head wires. Fix the strips with clips onto where you need, put the wire into sockets to light the strips.

2. Cut: the strip can be cut every one meter in the place where marked "scissor drawing"Packing

3. Connect:

1). Power cord front ends connection way;

2). Intermediate head connection way:Plug the head wire into a strip to conduct the electricity or plug a middle plug into the ends of two separate strips to connect them into a long strip, after being connected, seal all the plugs with enough glue;

3). Use end cap to block up the cutting ends:Block up the end with end caps, seal with enough glue to make sure it's still waterproof.