Flat Panel Solar Collector

--Coating Black chorme or Blue TINOX

Type of Construction Flat Plate Collector for On-roof, In-roof, Flat-roof and Pitched roof

Good heat efficiency and appearance as well as absorbing price.

Certificates CE

Specification
Measurement	2,000 x 1,000 x 70/80/90 mm (L* W* H)
Gross collector area	2 m 2
Absorber area	1.88 m 2
Weight empty	34 KG
Fluid content	1.25 Liters
Absorber
Absorber Technology	Al strip absorber in copper tube with harp hydraulic, ultrasonic welded
Absorbing board material	0.15 mmCopper
Water pipe material	TP2Copper Pipe Φ10mm; 8 pipes (0.5mm)---Could be adjusted.
Absorber Coating	Highly selective (Black chrome)
Frame	Aluminum alloy or stainless steel
Cover material	Low Iron Tempered Textured Glass
Glass transmissivity	≥95 %
Rear panel	0.8mmaluminum-zinc coated steel sheet
Collector connection	Φ22mmor 3/4"; 0.8mm (thickness)
Thermal Insulation
Material	Fiberglass/rock wool; high temperature resistant
Thickness	45±3mm
Density	35kg/cube
Technology Data
Heat transfer fluid	Water-propylene glycol mixture 50/50
Angle of inclination	20-90°
Zero-loss collector efficiency	88%
Heat loss coefficient a1	3.82 W/m2·K
Heat loss coefficient a2	0.008 W/m2·K
Absorptivity	95%±2%
Emissivity	4%±2%
Maximum working temperature	190°C  1000W/m2
Max. operation pressure	0.6 Mpa
Nominal flow rate	50 Liters/Hr