floatation machine: This series flotation machine is suitable for non-ferrous metals and sorting, also can be used for non-metallic such as: coal fluorite, talc choice of don't. The flotation machine by motor drive drive sanjiaodai impeller spinning, produce centrifugal formation negative pressure, on the one hand, inhaled plenty of air to pulp mixed, on the one hand, mixing the pulp and drug combinations, and at the same time refining bubble,make mineral bonding foam on, float to the pulp face and form the mineralization bubble. Adjusting disc height,control liquid surface, the useful bubble was scraper blow out.
The flotation machine instructions: before starting the first check each part should be bolt, stop before starting shall first generation wheel rotation manually, in case the sediment deposition increases motor load, the work should be careful adjustment gate height, make liquid surface stability, to keep mine slurry mineralization foam
blow on the inflow slots. Impeller and stator should maintain a certain amount of spacing, wear should pay attention to the change, the pump body bearing every three months to maintain a. Wearing parts: impeller, stator:
Technical Parameters of XJK Series Flotation Machinery:
TEL:15346594488 0371-67822731
blow on the inflow slots. Impeller and stator should maintain a certain amount of spacing, wear should pay attention to the change, the pump body bearing every three months to maintain a. Wearing parts: impeller, stator:
|
Model |
SF0.37 | SF0.7 | SF1.2 | SF2.8 | SF4 | |||||||
| Tank Volume(m³) | 0.37 | 0.7 | 1.2 | 2.8 | 4 | |||||||
| Impeller Dia(mm) | 300 | 350 | 450 | 550 | 650 | |||||||
| Capacity(m³/min) | 0.2-0.4 | 0.3-0.9 | 0.6-1.2 | 1.5-3.5 | 0.5-4 | |||||||
| Impeller Rotate Speed(m³/min) | 352 | 400 | 312 | 268 | 238 | |||||||
| Motor | Model | ①Y90L-4 | ①Y100L2-4 | ①Y132M2-6 | ①Y160L-6 | ①Y180L-6 | ||||||
| ②Y90S-4 | ②Y90S-4 | ②Y90S-4 | ②Y90S-4 | ②Y90L-4 | ||||||||
| Power(Kw) | ①1.5 | ①3 | ①5.5 | ①11 | ①15 | |||||||
| ②1.1 | ②1.1 | ②1.1 | ②1.1 | ②1.5 | ||||||||
| Overall Dimension(mm) | 700×700×750 | 900×820×950 | 1100×1100×1100 | 1700×1600×1150 | 1850×2050×1200 | |||||||
| Unit Weight(kg) | 468 | 600 | 1373 | 2338 | 2660 | |||||||
Technical Parameters of XJK Series Flotation Machinery:
|
Model |
XJK-0.35(3A) | XJK-0.62(4A) | XJK-1.1(5A) | XJK-2.8(6A) | XJK-5.8(7A) | ||
| Effective Volume(m³) | 0.35 | 0.62 | 1.1 | 2.8 | 5.8 | ||
| Capacity(m³/min) | 0.18～0.4 | 0.3～0.9 | 0.6～1.6 | 1.5～3.5 | 3～7 | ||
| Rotate Speed(r/min) | 470 | 400 | 330 | 280 | 240 | ||
| Impeller Dia (mm) | 300 | 350 | 500 | 600 | 750 | ||
| Motor | Model | Rotator | Y90L-4 | Y100L2-4 | Y132M2-6 | Y160L-6 | Y200L2-6(Y225M-6) |
| Scraper | Y90S-4 | Y90S-4 | Y90S-4 | Y90S-4 | Y90L-4 | ||
| Power(Kw) | Impeller Motor | 1.5 | 3 | 5.5 | 11 | 22(30) | |
| Scraper Motor | 1.1 | 1.1 | 1.1 | 1.1 | 1.5 | ||
| Weight: (t/Single Tank) | 0.43 | 0.86 | 1.38 | 2.33 | 3.533 | ||
TEL:15346594488 0371-67822731