1. The body of saw blade uses 65Mn steel plate. It’s cutted in shape by numerical control machine. The internal stress removed, stress deformation won’t happen.
2. Tungsten carbide tip, its hardness up to RA92.5, bending resistance above 2000N/mm2
3. The Solder uses the sliver soldering wire made by the Joint-Verture. Special compound mode of sliver & copper can remove the deformation
4. Automatic cutter grinding. With high precision, the knife edge is smooth and sharp.
Sizes available:| Code | D(mm) | B(mm) | d(mm) | Z | Device |
| SBU001 | 180 | 3.2 | 30 | 60 | ATB |
| SBU002 | 230 | 3.2 | 30 | 60 | ATB |
| SBU003 | 250 | 3.2 | 30 | 60 | ATB |
| SBU004 | 250 | 3.2 | 30 | 80 | ATB |
| SBU005 | 300 | 3.2 | 30 | 60 | ATB |
| SBU006 | 300 | 3.2 | 30 | 72 | ATB |
| SBU007 | 300 | 3.2 | 30 | 80 | ATB |
| SBU008 | 300 | 3.2 | 30 | 96 | ATB |
| SBU009 | 350 | 3.5 | 30 | 72 | ATB |
| SBU010 | 350 | 3.5 | 30 | 84 | ATB |
| SBU011 | 350 | 3.5 | 30 | 108 | ATB |
| SBU012 | 400 | 3.5 | 30 | 96 | ATB |
| SBU013 | 400 | 3.5 | 30 | 80 | ATB |