1). Description:
This machine is suitable for printing various plastic film (BOPP, PET, CPP, PE NYLON, PVC), thin paper, foil, and other reel type material.
The printing speed is 100m/min, mechanical speed 120m/min.
The printing speed is 100m/min, mechanical speed 120m/min.
1. Main driving structure: Controlled by INOVANCE frequency controlled motor, axle coupling driving.
Feature: Stable running.
2. Shaftless printing roller fixing System: adopt pneumatic cylinder fixing style to drive the printing roller core, and transverse adjustment through screw.
Feature: Swift printing roller replacement, so as to insure the concentric of printing rollers to improve printing precision.
3. Ink scraper structure: use air diaphragm pump to cycling and feeding ink; doctor blade slowing drive by low speed synchro-motor which can be up & down and angle adjusted; the pressure controlled by double pneumatic cylinder.
Feature: increase service life of printing roller and easy use.
4. Imprinting ascending and descending structure: controlled by twin pneumatic cylinder synchronous ascend and descend; oscillating arm type cylinder seat to insure the stability of material tension.
Feature: insure the pressure equalization, decrease chromatic aberration.
5. Overprint Mechanical hand: longitudinal automatic overprinting adjusted by micro-computer (through photocell detecting) and synchronous motor (through screw rod slow driving).
Feature: flexible, stable, and high overprint precision.
6. Rewinding and unwinding system: double stations, auto-cutting and connecting for rewinding, and controlled by moment motor; Rewinding traction adopt vector frequency controlled motor.
Unwinding adopt magnetic powder brake constant tension controlling.
Feature: low tension variety, to reduce waste and cost-cutting.
Unwinding adopt magnetic powder brake constant tension controlling.
Feature: low tension variety, to reduce waste and cost-cutting.
7. Drying & cooling system: drying tunnel wind cycling by centrifugal blower; temperature controlled by intelligent temperature controller; material cooling by singe unit wind cooling device.
Feature: insured drying and cooling effect, increase product quality.
2). Main Technical Specification:
Model
|
YAD-A8600
|
YAD-A8800
|
YAD-A81100
|
Printing width
|
600mm
|
800mm
|
1100mm
|
Precision of overprint
|
±0.15mm
|
±0.15mm
|
±0.15mm
|
Diameter of printing roller
|
100-300mm
|
100-300mm
|
100-300mm
|
Printing speed
|
50-100m/min
|
50-100m/min
|
50-150m/min
|
Diameter of material
|
600mm
|
600mm
|
600mm
|
Diameter of core
|
76mm
|
76mm
|
76mm
|
Voltage
|
380V
|
380V
|
380V
|
Fan power
|
Heat wind:1.5kw
Cold wind:0.75kw
Air draft: 2.2kw(each)
|
Heat wind:1.5kw
Cold wind:0.75kw
Air draft: 2.2kw(each)
|
Heat wind:2.2kw
Cold wind:1.5kw
Air draft: 3kw(each)
|
Main motor power
|
5.5kw
|
5.5kw
|
7.5kw
|
Drying tunnel power
|
9kw/color
|
10kw/color
|
12kw/color
|
Total power
|
115kw
|
135kw
|
145kw
|
Overall dimensions
|
12500x1950x2550mm
|
12500x2150x2550mm
|
12500x2450x2550mm
|
Weight
|
10000kg
|
12000kg
|
15000kg
|
3). Main Furnishment List
1) Frequency inverter: INOVANCE, China
2) Pneumatic cylinder: Made in China
3) Computer overprint system: ST-2000C or HMTS-296
4) Swith and Bottom: China
5) Bearing: some imported
6) Low voltage apparatus: CHNT, China
7) Temperature controller: China
8) Moment motor: China
9) Ink circuling pump: China
4). Machine Structure
1) Unwinding System:
l Unwinding type: Double arm, Center rotary type.....................................................................1 set
l Automatic tension control..........................................................................................................1 set
l Megnatic powder brake..............................................................................................................1 set
l Unwinding air bag shaft.............................................................................................................2 sets
l 0.75 kw driver and decellerator for unwinding rotary.............................................................. 1 set
l Electric control case....................................................................................................................1 set
2) Unwinding feeding system:
l Feeding steel roller.....................................................................................................................1 piece
l Feeding rubber roller.................................................................................................................1 piece
l Pneumatic cylinder....................................................................................................................1 set
l Pressure adjust valve..................................................................................................................1 set
l Pressure sensor...........................................................................................................................1 set
3) Printing system
l Printing unit...........................................................................................................................8 groups
l Closed cyclic type drying tunnel.................................................................................................8 sets
l Dring wind feeding fan...............................................................................................................8 sets
l Digital type auto temperature controller...............................................................................8 groups
l Printing press rubber roller lifting system.................................................................................8 sets
l Printing rubber press roller: 420mm, 620mm, 800mm...................................................8 pcs/each
l Movabe doctor blade scraping device........................................................................................8 sets
l Compensation roll device...........................................................................................................7 sets
l Ink tray lifting device..................................................................................................................8 sets
l Electricl control case...................................................................................................................8 sets
l Close type gear driviing decellerator..........................................................................................8 sets
l Cooling wind blower....................................................................................................................8 sets
l Cooling wind case........................................................................................................................8 sets
l Air drafting system..................................................................................................................2 group
l Lamps..........................................................................................................................................8 pcs
l Stainless steel ink tray and bucket..............................................................................................8 sets
l Ink mixing roller..........................................................................................................................8 sets
4) Output system:
l Out feeding steel roller..............................................................................................................1 piece
l Out feeding rubber roller..........................................................................................................1 piece
l Pneumatic cylinder...................................................................................................................1 set
l Pressure adjust valve................................................................................................................1 set
l Pressure sensor.........................................................................................................................1 set
5) rewinding System:
l Rewinding type: Double arm, Center rotary type....................................................................1 set
l Rewinding A, B group moment motor (25NM).......................................................................2 sets
l Rewinding traction vector frequency controlled motor...........................................................1 set
l PLC control non-stop material auto-cutting and connecting device.......................................1 set
l 0.75 kw driver and decellerator for unwinding rotary.............................................................1 set
l Rewinding lamp case and lamps..............................................................................................1 set
l Electric control case..................................................................................................................1 set
l Rewinding (A,B group) air bag shaft.......................................................................................2 pieces
l Rewinding inspecting lamp case...............................................................................................1 set
6) Driving System:
l Main motor: 5.5kw.....................................................................................................................1 set
l Driving speed change box..........................................................................................................8 sets
l Driving coupling shaft................................................ ...............................................................1 set
l Main printing roller fixing device...............................................................................................1 set
7) Electric Control System:
l Auto overprinting system............................................................................................................1 set
l Printing unit heating, cooling, and lighting................................................................................8 sets
l Main motor & rewinding traction tension control system frequency synchronous controlled .1 set
l Unwinding auto tension controller.............................................................................................1 set
l Printing drying case................................................................................................................8 groups
l Still video (staic image): Optional
4). PRICE:
YAD-A INCLUDING COMPUTER STILL VIDEO SPEED:130M/MIN
|
||||
WIDTH
|
COLOR
|
PRICE(FOB)
USD
|
ADD OR REDUCE PER COLOR (USD)
|
TIME
(DAYS)
|
1000MM
|
6
|
89600
|
7350
|
30-40
|
800MM
|
6
|
82500
|
6860
|
|
600MM
|
6
|
80000
|
6400
|
|
YAD-B WITHOUT SHAFT INCLUDING COMPUTER SPEED:90 M/MIN
|
||||
1000MM
|
6
|
51500
|
5150
|
20-30
|
800MM
|
6
|
48500
|
4850
|
|
600MM
|
6
|
46500
|
4700
|
|
YAD-C WITH SHAFT INCLUDING COMPUTER SPEED:80 M/MIN
|
||||
1000MM
|
6
|
40000
|
4060
|
15-20
|
800MM
|
6
|
36000
|
3750
|
|
600MM
|
6
|
34000
|
3550
|