Heat pipe collector
1. Can be matched with any low pressure, high pressure hot water system.
2. Use heat pipe for the heat conduction and can get a high heat absorption efficiency and rapid heat transfer.
3. Easy plug-in design and installation.
4. Corrosion-resist aluminum manifold and frame.
5. optional 38°/ 45°frame can resists wind with a velocity of 36m/s.
6. Can supply hot water to large amount water need.
7. economical for hotel, school, dormitory, hospital and tall high-buildings.
Specification:
Inner manifold material
|
Red copper channel
|
Out shell material of manifold
|
Aluminum alloy
|
Frame material
|
Aluminum alloy
|
Heat pipe material
|
99.93% pure copper & lead free,45% silver brazing
|
Rubber seals and rubber rings
|
HTV grade silicone rubber
|
Optional installation angle
|
0°,30°,38°,45°
|
Maximum operation pressure
|
12 bar
|
Optional flow rate
|
0.11/min/tube 0.026 G/min/tube
|
Vacuum tube
|
Φ47-1500, Φ58-1800mm with heat pipe
|
Daily efficiency
|
=55%(=42% in winter)
|
Hailstone resistance
|
Dia.=25mm
|
Heat pipe anti-freezing
|
=-35℃
|
Life-span
|
Approximate to 15 years
|