Product Main

Specifications

Tilt switches SW-1260C
Function:
1.       horizontal tilt detecting
2.       vertical flip detecting
3.        
Applications
1.      Automotive devices
2.      Home electrical appliances
3.      Communication devices
4.      Toys
 
Features:
1.       SW-1260 C is ball type tilt vibration sensitive switch
2.       When the product being upright, is open OFF-state. When the products tilt to any direction and more than 0-90 degrees, switch 5# feet and the direction of the corresponding # 4 feet conductivity ON-state
3.       Product completely airtight, waterproof, dustproof
4.       In the normal, switch life can reach 10,0000 cycles lifespan
5.       Material compliant with ROSH directive, replace the mercury switch
6.       Switch signals simple, circuit is simple in design, economic price
7.       This switch only use for signal trigger, shall not make use of the power switch
 
Electrical characteristics:
Voltage: <12V
Current: <20mA
Conductive time: 2ms
Closed resistance: <10 ohm
Open resistance: >10M ohm
 
Mechanical characteristics:
Temperature range: Operating: -25 to 80°C,
Pull force of terminal: 500gf for 1 minute
Humidity: 95% RH, 40°C for 96 hours
Operating lifespan: 100,000 cycles
 
Bill of material:
Switch: ABS
Stamping parts: Brass, bottom nickel plated-silver-plated surface
Ball: brass ball, silver-plated
 
Welding characteristics
   Solder tin, tin content 100%
   Welding humidity: 260°C ±10°C
   Welding time: 2-2.5 seconds
Do not use strong acid, alkali flux
 
Packaging: 1000PCS/bag (PVC plastic, According to electronic material storage requirements for storage)
 
Note
1.      If the product used for high security products and durability of extremely high equipment (such as life safety equipment, aviation facilities, disaster prevention device), please confirm whether a share, can seek advice our company for details
2.      In case of fire, Please do not overload applicable,
3.      The welding temperature or time more than standard, can cause switch collapse
4.      Do not use water solubility flux. May cause damage to the switch
5.      Do not use solvent wash switch
6.      This switch conduction rate of 98% (conductivity rate per 100 times value switch actions, can good conduction ratio)