Tip-over switches SW-850D
Function:
1. horizontal tilt anti-fall detecting
2. vertical flip anti-fall detecting
Applications
1. Heating device anti-fall
2. Electric fan anti-fall
3. Home appliances anti-fall
Features:
1. SW-850D is Ball type tilt vibration sensitive switch
2. When the product upright is in ON-state, as the products tilt to any direction and exceed 45 degrees, switch stay in a disconnect OFF-state
3. Product completely airtight, waterproof, dustproof
4. In the normal, switch life can reach 10,0000 cycles lifespan
5. Material compliant with ROSH directive, replace the mercury switch
6. Simple for switch signals and circuit , and economic price
Electrical characteristics:
Voltage: <12V
Current: <20mA
Conductive time: about 0.5ms
Closed resistance: <30 ohm
Open resistance: >10M ohm
Mechanical characteristics:
Temperature range: Operating: -40 to 80°C
Pull force of terminal: 500gf for 1 minute
Humidity: 95% RH, 40°C for 96 hours
Operating lifespan: 100,000 cycles
Bill of material:
Copper cap: copper tube copper-plated
Guide pin : brass wire, gold-plated
Ball: dual Stainless steel, silver-plated
Sealing colloidal particle: Heat resistance nylon
Skin: PE Shrink Sleeve
Welding characteristics
Solder tin, tin content 100%
Welding humidity: 260°C ±10°C
Welding time: 2-2.5 seconds
Do not use strong acid alkali flux
Packaging: 1000PCS/bag (PVC plastic)
Note
1. If the product used for high security products and durability of extremely high equipment (such as life safety equipment, aviation facilities, disaster prevention device), please confirm whether a share, can seek advice our company for details
2. In case of fire, Please do not overload applicable,
3. The welding temperature or time more than standard, can cause switch collapse
4. Do not use water solubility flux. May cause damage to the switch
5. Do not use solvent wash switch
6. This switch conduction rate of 98% (conductivity rate per 100 times value switch actions, can good conduction ratio)