Vibration switch SW-580PT series

Function:

1.       vibration detecting

 

Applications

1.      Alarm device

2.      Toys

3.      Electronic scale

 

Features:

1.       SW-580PT series are spring type, no directional vibration sensor trigger switch, any angle can trigger

2.       switch is open circuit OFF-state, when it is static, when external force to touch and corresponding vibration, or movement speed achieve adequate (partial) centrifugal force, conductive pick feet will produce instant conductivity is instant ON-state, when external force disappear, switch back to open circuit OFF-state.

3.       Switch have the identification P at the bottom, for completely airtight;

4.       Material compliant with ROSH directive, replace the mercury switch

5.       Trigger high-slowness sensitivity

6.       Switch external for metal, high heat resistance

 

 

Electrical characteristics:

Voltage: <12V

Current: <20mA

Conductive time: 2ms

Closed resistance: <30 ohm

Open resistance: >10M ohm

 

Mechanical characteristics:

Temperature range: Storage: -40°C to 80°C, Operating: -40°C to 80°C

Pull force of terminal: 300gf for 1 minute

Humidity: 95% RH, 40°C for 96 hours

Operating lifespan: 200,000 cycles

 

Bill of material:

Outer tube: brass wire nickel-plated

Copper tube: brass wire, silver-plated

Spring: Stainless steel, phosphorus copper wire

Sealing glue: epoxy resin

 

Welding characteristics

   Solder tin, tin content 100%

   Welding humidity: 260°C ±10°C

   Welding time: 2-2.5 seconds

Do not use strong acid, alkali flux

 

Packaging: 1000PCS/bag (PVC plastic)

 

Note

1.      If the product used for high security products and durability of extremely high equipment (such as life safety equipment, aviation facilities, disaster prevention device), please confirm whether a share, can seek advice our company for details

2.      In case of fire, Please do not overload applicable,

3.      The welding temperature or time more than standard, can cause switch collapse

4.      Do not use water solubility flux. May cause damage to the switch

5.      Do not use solvent wash switch

6.      This switch conduction rate of 98% (conductivity rate per 100 times value switch actions, can good conduction ratio)