1. Liquid injection moulding silicone rubber application
It mainly use for making precision molds, baby nipples , silicon insoles, food grade molds(chocolate, cake moulds) life casting silicon products, fabric finishing, seal for electronic components and solar circuit board, trademark decoration, baby nipples, silicone gaskets, kitchen bakeware, sports facilities, cable accessories, etc.
2. Main features of liquid injection moulding silicone rubber
1. High transparency
2. Excellent tear strength(≥ 35KN/m)
3. Good resilience
4. Good heat stability and weatherability ( temperature resistant range of -60° C--250° C)
5. Anti-yellowing
6. Heat-ageing resistance
7. Cured under high temperature
7. Cured under high temperature
3. Using Instructions of addition curing silicon rubber
Applicable to the injection molding process
Mixing component A with B evenly according its mix ratio, it is ready for use after
Comply with USA CFR 21. Part. 177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.
4.Injection Moulding Silicone Rubber operations guidelines
5. Injection Moulding Silicone Rubber Other applications:
Applicable to the injection molding process
Mixing component A with B evenly according its mix ratio, it is ready for use after
Name: Injection Moulding Silicone Rubber
Number: HY-920
Usage: General purpose type for injection moulding silicone products
Comply with USA CFR 21. Part. 177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.
Standard Datasheet:
|
Item
|
HY-920
|
|
|
Appearance
|
tansparent
|
|
|
Viscosity (Pa. S)
|
600
|
|
|
Density (g/cm3)
|
1.08
|
|
|
Hardness (A° )
|
40
|
|
|
Elongation at break (%)
|
550
|
|
|
Tear strength (KN/m)
|
35
|
|
|
Curing condition
|
After Mixed A with B according to mixing ratio of 1:1, 150mm× 150mm× 2mm, mould will be formed in 7 minutes under temperature of 150° C
|
|
4.Injection Moulding Silicone Rubber operations guidelines
After the component A and component B are mixed under the temperature of 20 °
the effective operating time is 5 days in sealing status, The effective operating time will shorten in case of rising temperature.
the effective operating time is 5 days in sealing status, The effective operating time will shorten in case of rising temperature.
Instruction: Typical data can not be directly used for actual production guidance. Please contact us for details.
5. Injection Moulding Silicone Rubber Other applications:
The series of products can also be used for producing other food grade silicone rubber products.
Any questions of Injection Moulding Silicone Rubber, please feel free to contact Angel