Inner diameter of label: ￠76mm

Max outer diameter of label: ≤ ￠300mm

Label width: 10-150mm

Label length: 20-250mm

Bottle diameter: 20-150mm

Bottle high: 30-350mm

Label precision: ± 1mm

Production capacity: about 100 bottle/min

Power supply: 220V-50Hz/60Hz (according to the customer’ s requirement)

Power: 750W

Weight: 500Kg

Dimension: 2500mm× 1500mm× 1400mm(L× W× H)

Main Unit

Step with into or servo motor, frequency converter (Taiwan, Japan), touch screen and PLC control Japan photoelectric switches, big torque motor and related parts step.

The machine adopts touch screen and PLC control system, chooses big torque step motor and Japan and Germany (transparent photoelectric) photoelectric device, frequency converter test pressure bottle conveying synchronization, at the same time each important parts of the mechanical action synchronization transmission, and to ensure the stick that standard, stable, reliable, efficient production line is or single label of the best equipment.

Main material

The machine is adopted 304 or 316 stainless steel and aluminum alloy materials, spare parts the use of standardized design interchangeable, fully meet the requirements of GMP.

The machine adopts imported PLC control system, or touch switch knob control, elected Japanese Omron (Germany transparent) photoelectric device, variable speed motors, conveyor chain board and imported belt related parts.

Host design absorbed import machines’ labeler transmits way, solving the general domestic labeling unstable factors.

The machine is suitable for different bottles, easy adjustment, can be finished in a short time.

The whole machine is designed to meet GMP standard.

This machine is suitable for medicine, chemical, food, commodity etc. Labeling for bottle and box of flat, square, circle, elliptic, tapered, single orientation etc.

Working principle

A conveyor belt in the physical, and then by the carrier of the correction institute, in physical and center position around to do correction, when sensor test to product after, back to signal to the labeling control system, in the right position control system control motor send out tags and attached with product to label in position, products through standard device attached, tag is attached with the products, products are simultaneously on both sides of the tag, so far the attached with the movement is finished.

If you have any question, don't hesitate to ask.