Brand        : YX               Model             : YXSP302

Input interface: RJ11                             Output interface      : RJ11

Bandwidth    : 12(MHz)        Transmission distance: 200(m)

Power voltage: 12(V)            Power frequency     : 20K(Hz)

Power        : 6(W)            Working temperature: -15*85(℃)

ADSL Splitter Specification

POST PORT IMPEDANCE:   Zr=600 Ohm

Modem

Modem impedance: 30 kHz to 4.4M Hz     100 Ohm

Insertion loss: @1004 Hz   <0.3dB  

                 200 Hz<f<3.4 kHz  1004Hz center   <± 1 dB          

Return loss: 300 Hz< f< 500 Hz    >=14 dB 

              500 Hz< f< 2000 Hz   >=18 dB

              2000 Hz< f< 3400 Hz  >=14 dB

LCL       : 200 Hz< f< 1K Hz      > =58 dB

              1K Hz< f< 3K Hz       >=53dB

                         

Attenuation: 30 kHz<f<2208 kHz    >21dB

 

Delay distortion: 200Hz<f<4KHz          100 u sec

DC resistance:                            <25 Ω

Isolation resistance, branch-branch: 100 VDC; term = ∞ Ω    >5MΩ    

 

 

 

Product size (mm):50*36.5*24

Weight (g):25

 

Inner package: PE bag

Unit for one PE bag

Size of PE bag (mm):113*85

 

Outer package: Neutral paper box/YIXI paper box

Size(mm): 380*260*210

QTY(PCS): 400

N.W. (KG) : 10

G.W. (KG) : 10.5

ADSL Splitter Product Description

When using ADSL connection with a telephone or fax machine, it's necessary to put a filter on the line to separate the signals for the modem (higher-frequency ADSL) from the signals for the phone & fax (lower-frequency POTS). Each phone or connection in the house will need a filter.
This filter/splitter has three RJ11 jacks to do just that. Connect the 'line' jack to your wall outlet cable, and connect the 'phone' and 'modem' jacks to your phone or fax line, and to the modem. Each jack is conveniently labeled.
Signal quality is preserved and your connections stay clear of static and noise from interference.

Please note: you will need to install a filter on each phone in the house to prevent line noise.