Our goal is to make the dirty, waste and used oil (From 1#, 5# ...to 1000#) to be fresh and cycling use in various industry in order to cut down their cost greatly, to protect environment as well as save energy through technical measures, the cost of our oil purifier is comparing lower  that is only  2 months operation will recover the equipment value...


Application

         It is widely used in machining industry, such as, machinery, bearing, aluminum process etc.
 

Refining Oils:

  kerosene, diesel oil, hydraulic oil, diesel engine oil, transformer oil etc.
 

Feature:

1. It purifies the oil with short time and good quality, regenerated oil standard is up to the national GB standard.

2. It has the perfect effect to remove the aluminum powder from the machine oil and motor oil in aluminum machining industry.

3. It can separate machine oil from kerosene

4. Easy-to- operate with low cost

Technical Data

 

Model	Unit	TS-32	TS-50	TS-80	TS-100	TS-160
Rated Flow	L/Min	32	50	80	100	160
Capacity	kg(8h/day)	300	500	800	1000	1500
Speed of decreased cycloid cycle	Min/KW	90
Pump Pressure	Mpa	0.05~0.3
Total Power	kw	2	2.2	3.03	4	5
Viscosity	40℃ mm2/S	GB Standard
Flash Point	℃	40
Acid Alkali Soluble in water	mgOH/g	≤0.03
Water content	﹪	No
Impurities	﹪	≤0.005
Copper carrion	100℃, 3h	≤1
Chroma		SH/T
Overall Dimension	mm	2400×1600×3200	2600×1800×3400	2700×2000×3500	2800×2100×3500	3000×2400×3700
Total Weight	kg	1000	1200	1300	1400	1500
Installment		Fixed