Product Main

Specifications

Natural Gas Electric Generator/Portable Generator 100KW~1000KW

Model Type SDNEG---60GF1-PT
Output Power (KW) 60
Voltage V 400
Alternator model DL12G24
Rated Current 108.3
Inlet pressure 100KPA-300KPA
Working pressure 0.756 MPA
Aspiration Natural Aspirated
Arrangement of cylinder V-6,
4-stroke-cycle
Bore/Stroke 105/125
Connection model 3 Phase 4 wire
Voltage regulate range ± 5%
Noise 112 dB(A)
Engine speed (rpm) 1000
Fuel consumption MJ/kwh 6.494
Exhaust temp ≤ 550
Ignition mode Spark-Ignited
Starting mode 24V DC Power
Insulation G2
Excitement Brushless excited
Dimension:
L x W x H (mm) 2190*700*1540
Weight (kg) 1250

Requirements for gas source: Inside the gas pipeline, within the range of 1 m before gas pressure regulator, the temperature of biogas ≤ 40 temp; Gas pressure should within the range of 100-300kPa;
The speed of gas pressure vibration ≤ 1kPa/min; Methane content of natural gas ≥ 70%;
H2S content ≤ 20mg/nm3; No free water, light oil
Diameter of impurities ≤ 5μ M; Content of impurities ≤ 30mg/Nm3;
Content of water ≤ 40g/Nm3;
For the optimization of system performance, users should provide data of gas composition and pressure to us. (For natural gas with methane content above 70%, we have a specially designed model)...
Oil well associated gas need to separate light oil and dehydration treatment, after the treatment, theCH4≤ 70%, but if the low calorific value is above 32MJ/Nm³ , customer need to provide the gas contents for optimized and applicable product. Which need special allocation.