CS5184MS QAM Modulator with MUX and Scrambler
Outline:
CS3084 QAM modulator with MUX and Scrambler is a QAM modulator which can multiplex up to 8 channels ASI input MPTS into one output transport stream (MPTS), and encrypt all channels. It also can insert EPG (electronic program guide), CA (conditional access), data broadcasting into output TS. Meantime it also supports auto-generation of PSI/SI information, PID re-mapping, service filtering and PSI/SI editing.
Outline:
CS3084 QAM modulator with MUX and Scrambler is a QAM modulator which can multiplex up to 8 channels ASI input MPTS into one output transport stream (MPTS), and encrypt all channels. It also can insert EPG (electronic program guide), CA (conditional access), data broadcasting into output TS. Meantime it also supports auto-generation of PSI/SI information, PID re-mapping, service filtering and PSI/SI editing.
Feature
◎ Output symbol rate 4.2～7Mbaud/s
◎ Bit rate range of input data:1.5～51.6Mbps
◎ Bit rate range of output data:15.5～56Mbps
◎ support ITU-T J.83 A,B and C
◎ 188 /204 packet automatic identification
◎ Error-correction codes completely fulfill DVB-C Standard
◎ Modulating modes :16QAM,32QAM,64QAM,128QAM,256QAM
◎ Multi-way input interface: ASI(DS3/E3 optional)
◎ Multi-way RF mixed output: ASI(DS3/E3 optional)
◎ (BW) range of output signal 4.83～8.05MHz (Roll-off factor:0.15)
◎ RF range:30～900MHz, 4 frequency points select output
◎ Output level range: 86dBuV～106dBuV(0.5dBuV step), gain tuning(-2.5～10.5dB)
◎ Large buffer memory, the ASI interface support both outburst and well-distributed code stream and uniform the code to improve the code rate.
◎ TS stream modulator have direct connection, multiplexing and scrambling function
◎ NIT mapping and sending, support 45 NIT mapping
◎ 8 group PID filtering and re-mapping
◎ PSI/SI information table pick-up, parse and modification
◎ SI information replacement and insert
◎ Input data null packet filtering and output data filling.
◎ PCR correction
◎ Show and inspect system input bit rate and valid bit rate real time
◎ adaptive filter circuit design to ensure excellent band rejection
◎ Providing RF output monitoring port(-20dB)
◎ Power off memory
◎ Error alarming
◎ LCD display
◎ Network control interface realizes remote maintenance, supervision and software upgrade
Specifications
◎ Output symbol rate 4.2～7Mbaud/s
◎ Bit rate range of input data:1.5～51.6Mbps
◎ Bit rate range of output data:15.5～56Mbps
◎ support ITU-T J.83 A,B and C
◎ 188 /204 packet automatic identification
◎ Error-correction codes completely fulfill DVB-C Standard
◎ Modulating modes :16QAM,32QAM,64QAM,128QAM,256QAM
◎ Multi-way input interface: ASI(DS3/E3 optional)
◎ Multi-way RF mixed output: ASI(DS3/E3 optional)
◎ (BW) range of output signal 4.83～8.05MHz (Roll-off factor:0.15)
◎ RF range:30～900MHz, 4 frequency points select output
◎ Output level range: 86dBuV～106dBuV(0.5dBuV step), gain tuning(-2.5～10.5dB)
◎ Large buffer memory, the ASI interface support both outburst and well-distributed code stream and uniform the code to improve the code rate.
◎ TS stream modulator have direct connection, multiplexing and scrambling function
◎ NIT mapping and sending, support 45 NIT mapping
◎ 8 group PID filtering and re-mapping
◎ PSI/SI information table pick-up, parse and modification
◎ SI information replacement and insert
◎ Input data null packet filtering and output data filling.
◎ PCR correction
◎ Show and inspect system input bit rate and valid bit rate real time
◎ adaptive filter circuit design to ensure excellent band rejection
◎ Providing RF output monitoring port(-20dB)
◎ Power off memory
◎ Error alarming
◎ LCD display
◎ Network control interface realizes remote maintenance, supervision and software upgrade
Specifications
ASI interface Input (4 in1, 8 in 1)
Connector: BNC
Impedance: 75Ω
Packet format: 188/204 bits
Access data rate: 270Mbps
Max valid bit rate: 51.6Mbps
DVB standard
Loop output (optional)
Connector: BNC
Impedance: 75Ω
Packet format: 188/204 bits
Access data rate: 270Mbps
Max valid bit rate: 51.6Mbps
DVB standard, support both outburst and well-distributed code stream
(Note: the length between cable and signal 20m, cable diameter> 3, 75Ω coaxial cable)
E3and DS3 interface
(optional) Input (G.703 standard , 2 routes)
Connector: BNC
Impedance: 75Ω
Packet format: 188 or 204 bits
Data rate E3/DS3(34.368Mbps/44.736Mbps)
Output (Loop out,2 routes)
Connector: BNC
Impedance: 75Ω
Packet format: 188 or 204 bits
Data rate E3/DS3(34.368Mbps/44.736Mbps)
(Note: the length between cable and signal 20m, cable diameter> 3, 75Ω coaxial cable)
RF output interface 2 RF output, one main out, one for monitoring
Connector: BNC
Impedance: 75Ω
Range of frequency output 30MHz-900MHz
Reflection loose ≥12dB
carrier suppression >58dB
(MER):≥38dB
SNR (out of band): ≥50dB
GB:-2.5～10.5dB (step: 0.25dB)
Main road output level 86-106dBuV(4 channel,0.5dB stepping)
RF OUT -20dB monitor interface
Output level 66-96dBuV(4 channel,0.5dB stepping)
Network management interface IEEE802.3 ETHERNET, RJ45 interface
Software protocol: SNMP protocol,(100Mbps)
Power supply: Voltage: 85V~265V A.C,
Frequency: 50/60Hz
Power: 25W
Working Environment
＋5°C～45°C for operation
－30°C～+70°C for storage
10~90% for relative humidity
To know more details, welcome to contact our salesman!
Castar technology Co,.LTD
Connector: BNC
Impedance: 75Ω
Packet format: 188/204 bits
Access data rate: 270Mbps
Max valid bit rate: 51.6Mbps
DVB standard
Loop output (optional)
Connector: BNC
Impedance: 75Ω
Packet format: 188/204 bits
Access data rate: 270Mbps
Max valid bit rate: 51.6Mbps
DVB standard, support both outburst and well-distributed code stream
(Note: the length between cable and signal 20m, cable diameter> 3, 75Ω coaxial cable)
E3and DS3 interface
(optional) Input (G.703 standard , 2 routes)
Connector: BNC
Impedance: 75Ω
Packet format: 188 or 204 bits
Data rate E3/DS3(34.368Mbps/44.736Mbps)
Output (Loop out,2 routes)
Connector: BNC
Impedance: 75Ω
Packet format: 188 or 204 bits
Data rate E3/DS3(34.368Mbps/44.736Mbps)
(Note: the length between cable and signal 20m, cable diameter> 3, 75Ω coaxial cable)
RF output interface 2 RF output, one main out, one for monitoring
Connector: BNC
Impedance: 75Ω
Range of frequency output 30MHz-900MHz
Reflection loose ≥12dB
carrier suppression >58dB
(MER):≥38dB
SNR (out of band): ≥50dB
GB:-2.5～10.5dB (step: 0.25dB)
Main road output level 86-106dBuV(4 channel,0.5dB stepping)
RF OUT -20dB monitor interface
Output level 66-96dBuV(4 channel,0.5dB stepping)
Network management interface IEEE802.3 ETHERNET, RJ45 interface
Software protocol: SNMP protocol,(100Mbps)
Power supply: Voltage: 85V~265V A.C,
Frequency: 50/60Hz
Power: 25W
Working Environment
＋5°C～45°C for operation
－30°C～+70°C for storage
10~90% for relative humidity
To know more details, welcome to contact our salesman!
Castar technology Co,.LTD