Can drainage machine
This machinery drains the cans by moving them upside down after the exhausting procedure. In the exhauster, some vapor water and remnant liquid from the can contents are left over. The drainage machine continuously drains the cans in the production line, so that the canned food production goes on uninterruptedly.
This machinery drains the cans by moving them upside down after the exhausting procedure. In the exhauster, some vapor water and remnant liquid from the can contents are left over. The drainage machine continuously drains the cans in the production line, so that the canned food production goes on uninterruptedly.
Standard Configurations ＆ Technical Parameters:
1. Built-in stainless steel drainage device
2. Stainless steel water tanks
3. Reserved outside drainage interface of stainless steel
4. Stainless steel main frame
5. Porous belt to facilitate water drainage
6. Magnets are used to fix cans which are automatically in and out in lines
7. Mitsubishi transmission to control speed
8. Machinery dimension: 2800 mm X 500 mm X 1600 mm (L×W×H)
Can dryer
The machinery is widely used to dry the surface of various kinds of cans (filled food) after cans sterilizing and surface cleaning. It is to prevent future corrosion and facilitate labeling.
Standard Configurations:
1. Changes available according to the customers’ workshop
2. Imported highly effective electric heat generator
3. Carbon steel hot air mixing tank and circulation pipe
4. Machine configuration stainless steel hot-air pipes, vents intensive configuration
5. Variable frequency, stepless speed-down electrical box, with Schneider button
and contactor
Technical Parameters:
1. Suitable Cans Diameter: 50 mm—150 mm
2. Suitable Cans Height: 50 mm—270 mm
3. Power Supply: AC 380 V, 50 Hz X 3
4. Machinery Dimension: 4000 mm X 300 mm X 1500 mm (L×W×H)
Overturning cage
The machine applies to every kind of pop can, glass bottle, plastic bottle. In the whole production process, it can rotate the cans and bottles by 180 degrees according different requirements of process flow. The machine also can do on production line inverting up and down continuously and rotating by other angles.
Overturning cage
The machine applies to every kind of pop can, glass bottle, plastic bottle. In the whole production process, it can rotate the cans and bottles by 180 degrees according different requirements of process flow. The machine also can do on production line inverting up and down continuously and rotating by other angles.
Technical parameters:
1. Production capacity: 500-1000 cans/min
2. Available cans: every kind of tin can, aluminum can, glass bottle, plastic bottle, etc.
3. Available can diameter: 50-153 mm
4. Available can height: 50-270mm
5. Size (L X W X H): 500 X 150 X 300mm