Features:
1. Single motor drives the helical gear reducer (hard tooth face) through gears. PLC and touch screen are adopted for control system (suitable for roll clearance adjusting by servo motor) or PLC and control panel (suitable for roll clearance adjusting by ratchet handle).
2. Compressing: by air-liquid booster pump and underneath type oil cylinder;
3. Roll clearance adjusting: automatically adjusted by servo motor driving middle slide wedge or manually adjusted by ratchet handle driving middle slide wedge.
4. Top roll and bottom roll are horizontally positioned. Square-shape casting stands. Special bearing for high precision mills and bearing clearance eliminating device.
5. Unwinder, rewinder, dust collecting for trimming process, damping device are designed for continuous rolling process. The roll self-unloader is easy operated for roll changing.
6. Options for continuous rolling process: S roll preheating device, thickness tester, jointing platform.
|
Parameters
|
|||
|
Roll size
|
Φ400×450 mm
|
Electrode width
|
Max 400mm Min 100mm
|
|
Output rpm (frequency control of motor speed)
|
2-10(r/min)
|
Rolling accuracy
|
≤±0.003mm
|
|
Rolling linear velocity (frequency control of motor speed)
|
2.5-12.5 (m/min)
|
Radial run-out of roll assembly
|
≤±0.003mm
|
|
Max. pressure between rolls
|
50-150t(1.0-3.5t/cm)
|
Diameter of electrode coil
|
Max φ400 mm
|
|
Main motor power
|
7.5kW
|
Weight of coil
|
Max 400 kg
|
|
System work pressure
|
21MPa
|
Preheating temperature of S roll
|
Room temperature (adjustable) -150℃
|
|
Tension adjusting range
|
2.3-20 kg(Infinitely variable control)
|
Cleaning adjusting accuracy between rolls
|
0.001mm(Touch screen)
|
|
Cleaning adjusting range between rolls
|
0-1.5mm
|
Overall dimension
|
2.8×1.1×1.8 m
|
|
Error correcting accuracy
|
±0.4mm
|
Total weight
|
6t
|