PU8610 is one component polyurethane adhesive with high tensile strength and elasticity.
Features
1. Bond very well with surface of variety material such as all kinds of metal, lumber, glass, polyurethane, epoxy, resign, PU and coating material, etc. Also with good cohesive force and durable elastic sealing performance
2. One component adhesive with fabulous thixotropy, it’s convenient to apply with rapid curing
3. Excellent water, weather and aging resistance
4. Excellent wear-resisting property, high tear strength
5. Paintable and polishable
6. No sag or flow phenomena within 30mm perpends
7. Primer required
Usage
1. Specially used for windshield and side glass
2. Also use for glass steel and plastic accessories (car roof, side body and car front)
3. For bonding different material which requires high tensile strength and elasticity, the bonding can bear high mechanical deformation force
◆Data Table
|
Model Number
|
PU 8610
|
|
Main Raw Material
|
Polyurethane
|
|
Color
|
Black
|
|
Density
|
1.25±0.05Gr/cc
|
|
Extrudability
|
≥40ml/min
|
|
touch dry time
|
20-60Min
|
|
Curing speed
|
3-5Mm/24hrs
|
|
Shore A-hardness
|
65±5ShoreA
|
|
Tensile strength
|
≥8N/mm2
|
|
Tensile-shear strength
|
≥4.5N/mm2
|
|
Application temperature
|
5~35℃
|
|
service temperature
|
-40~80℃
|
Note:
①All data above ware tested under standardized condition.
②All data listed in the chart were for rhe generalized item in the series; please refer to the related datasheet for special items.
③Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.
◆Operation
Clean before operation
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
Direction of operation
Tool:Manual or pneumatic plunger caulking gun
For cartridge
1.Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
2.
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength
For sausage
1.Clip the end of the sausage and place in barrel gun
2.Screw end cap and nozzle on to barrel gun
3.Using the trigger extrude the sealant with equal strength
Attention of operation
Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accident or if you feel unwell, seek medical advice immediately
◆Package and Storage
Package Storage
310ml cartridge, 20pcs/carton Keep in cool and ventilative place
400ml/600ml sausage, 20pcs/carton Temperature≤25℃, humidity≤50%RH
Color:Black Shelf life: 9 months