1.       General Introduction

CAT.6 PATCH PANEL can be applied to 1000Mbps Ethernet Networking.

You can impact wire into 110 IDC with 110 impacted Tool or KRONE.

Impact the tool convenient. Features meet FCC subpart 68 requirements,

This Patch Panel can provide all 125MHZ bandwidth.

 

2.       General Construction

The panel can be mounted on any standard 483 (19 inch) equipment rack or communication cabinet. The back cable management helped you to arrange and tie the cable orderly and conveniently.

 

3.       Content of this package

One 48 port patch panel accessories: four screws; ten cable tics

One 24 port patch panel accessories: four screws; eight cable tics

One 18 port patch panel accessories; four screws; six cable tics

One 12 port patch panel accessories; four screws; four cable tics

 

4.       Appliance Introduction

AWG 22-24 C5e cable wires are recommended for this installation

Verifying the wiring follows the paste color code of the panel back cover

Proper termination tools should be used (e. g. 110 or KRONE Universal Wire Insertion tool). Be aware of the insertion direction for wires.

When impacting the wire you must identify with the standard

ANSI/TIA/EIA-568A/B

 

5.       Installation procedures

Cable management: can be mounted and dismount conveniently, it made the cable arrangement easy and convenient, 24 pair’s holes can satisfy with your different position and type request.