frequency converter System Advantages
1, low frequency 0.5Hz can reach 150% rated torque output cogging processing strong cutting force.
2, the maximum output frequency of 400Hz, fully meet the CNC machine tools, high-frequency processing requirements.
3, the current closed-loop control 180% of the rated torque acceleration and deceleration, do not jump over-current protection, the system response speed.
4, two multiple frequency input: voltage source 0 ~ 10V input current source 4 ~ 20mA or 0 ~ 20mA input.
5, the speed signal input and the actual speed of the output linearity is good, ± 1%
6, built-in RS485 interface, the computer network control
7, through rigorous EMS testing, anti-interference ability
8 built-in brake unit, and optional braking resistor
1, low frequency 0.5Hz can reach 150% rated torque output cogging processing strong cutting force.
2, the maximum output frequency of 400Hz, fully meet the CNC machine tools, high-frequency processing requirements.
3, the current closed-loop control 180% of the rated torque acceleration and deceleration, do not jump over-current protection, the system response speed.
4, two multiple frequency input: voltage source 0 ~ 10V input current source 4 ~ 20mA or 0 ~ 20mA input.
5, the speed signal input and the actual speed of the output linearity is good, ± 1%
6, built-in RS485 interface, the computer network control
7, through rigorous EMS testing, anti-interference ability
8 built-in brake unit, and optional braking resistor