natural gas generator type : 200kw natural gas generator;200kw gas generator;200kw natural gas generator sets;200kw silent natural gas generators;200kw natural gas gensets ;gas generator: 200kw gas generator/gensets/generator sets/gas generators;200kw Soundproof Biogas/Landfill Gas Fulled Generator Set/Engine/Genset;
Shengdong 200KW soundproof biogas/landfill gas fulled generator set/engine/genset/generating set
Conditions for Using
1. The temperature of the gas should not surpass 40ºC when the distance between the gas and the pressure regulating valve for air inflow is 1m.
2. The range of the pressure that this biogas generator set can sustain should be 3kPa~10kPa and the fluctuated frequency should not surpass 1kPa/min.
3. The content of the methane in the biogas should not be lower than 45% and its fluctuated frequency should not surpass 2%/min.
4. The content of H2S should not surpass 200mg/Nm3 and the content of NH3 should not surpass 20mg/Nm3.
5. The granularity of the impurity should not surpass 5μ m and the content of the impurity should not surpass 30mg/Nm3.
6. The content of water in biogas used in this biogas generator set should not surpass 40g/Nm3.
7. For biogas with methane of about 30%~45%, low density biogas generator should be used.
For those gases which cannot reach the conditions above, this biogas generator set should be specially allocated after evaluation according to the specified composition, pressure, temperature, etc. Provided.
Technical Specifications
Model 200GF-RG
Model of gas engine G6190ZLDK-2A
Model of generator 1FC6 354-6LA42
Rated power(kW) 200
Rated rotated speed (r/min) 1000
Rated voltage(V) 400
Rated current(A) 360
Rated frequency(Hz) 50
Power factor(cosφ ) 0.8
Power supply mode Three coils wired by 3 phase line and 1 zero line wire in Y-connection way.
Excitation way Brushless excitation
Way for adjusting pressure Automatic adjusting pressure
Starting up method 24VDC Electric starting system
Way for adjusting speed Electronic governor for adjusting speed
Dimension (LXWXH)(mm) 5300× 1970× 2250
Net weight (kg) 8100
Technical Parameters
Model G6190ZLDK-2A
Number of cylinder 6
Arranging way of cylinders Straightly arranged
Diameter of cylinder(mm) 190
Route(mm) 210
Total displacement(L) 35.73
Rated power(kW) 210
Rated rotate speed(r/min) 1000
Min. Stable rotate speed with empty load(r/min) 600
Dimension(L× B× H) (mm) 3226× 1120× 2005
Net weight(kg) 4500
Conditions for Using
1. The temperature of the gas should not surpass 40ºC when the distance between the gas and the pressure regulating valve for air inflow is 1m.
2. The range of the pressure that this biogas generator set can sustain should be 3kPa~10kPa and the fluctuated frequency should not surpass 1kPa/min.
3. The content of the methane in the biogas should not be lower than 45% and its fluctuated frequency should not surpass 2%/min.
4. The content of H2S should not surpass 200mg/Nm3 and the content of NH3 should not surpass 20mg/Nm3.
5. The granularity of the impurity should not surpass 5μ m and the content of the impurity should not surpass 30mg/Nm3.
6. The content of water in biogas used in this biogas generator set should not surpass 40g/Nm3.
7. For biogas with methane of about 30%~45%, low density biogas generator should be used.
For those gases which cannot reach the conditions above, this biogas generator set should be specially allocated after evaluation according to the specified composition, pressure, temperature, etc. Provided.
Technical Specifications
Model 200GF-RG
Model of gas engine G6190ZLDK-2A
Model of generator 1FC6 354-6LA42
Rated power(kW) 200
Rated rotated speed (r/min) 1000
Rated voltage(V) 400
Rated current(A) 360
Rated frequency(Hz) 50
Power factor(cosφ ) 0.8
Power supply mode Three coils wired by 3 phase line and 1 zero line wire in Y-connection way.
Excitation way Brushless excitation
Way for adjusting pressure Automatic adjusting pressure
Starting up method 24VDC Electric starting system
Way for adjusting speed Electronic governor for adjusting speed
Dimension (LXWXH)(mm) 5300× 1970× 2250
Net weight (kg) 8100
Technical Parameters
Model G6190ZLDK-2A
Number of cylinder 6
Arranging way of cylinders Straightly arranged
Diameter of cylinder(mm) 190
Route(mm) 210
Total displacement(L) 35.73
Rated power(kW) 210
Rated rotate speed(r/min) 1000
Min. Stable rotate speed with empty load(r/min) 600
Dimension(L× B× H) (mm) 3226× 1120× 2005
Net weight(kg) 4500