SSAW FOR Marine piling with the requirements of the pipe coil is relatively high, usually with a large diameter thick-walled spiral pipe, we produced the SSAW with the diameter of the 219mm-3620mm and Wall thickness 5mm to 25mm, fully compliant with the standard of marine piling works and you can choose a variety of materials.

Supply SSAW steel pipe FOR Marine piling

1. Application: used for marine piling

2. Outer Diameter: 219mm - 3620mm

3. Wall Thickness: 5mm -25mm

4. Length: 6mtr-18mtr

5. Standard and steel grade: BS: 1387, EN10217, ASTM A 53(Gr. A, Gr B, Gr C, Gr. D)

6. End: square ends (straight cut, saw cut, and torch cut). Or beveled for welding, beveled,

7. Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy,? Fusion Bond Epoxy, 3-layers PE)

8. Packing: Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps.

9. Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield

strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.

10. Mill Test Certificate: EN 10204/3.1B