VVDI VAG Commander Vehicle Diagnostic Tool
 

Note: New update is released; please send your serial number to us for update file! (07-03-2012)

New update for Vag VVDI: immo plus 8.0
1. You have to update your hardware before run the immoplus 7.0(Give us your VVDI ID, we make update file for you to update your hardware)
2. New update support 2011 year AUDI A6L/Q7 EZS
3. Some car model of A3/TT/R8 can directly make key
4. Support A4, RB8 key learning function
5. Automatically add VW fourth-generation anti-theif dashboard diagnose function
 

VVDI VAG Commander Vehicle Diagnostic Tool function added:
1. Support NEC 24C32, NEC 24C64 change mileage through obd2, generate dealer’s keys, read and write EEPROM and backup flash data.
2. Support GOLF5 MM7(9S12) change mileage through obd2, generate dealer’s keys, read and write EEPROM and backup flash data.
3. Add TA special chip pre-program. Directly pre-program ID48 to TA2,TA3, TA4, TA5 chips.
 

Attention: IMMO PLUS 7.0 software and VAG Commander software can use VVDI hardware together, but previous VVDI customer need update hardware then can support IMMO Plus software.

Function:
1) Extracting security access codes (PIN) by OBDII
2) Programming keys by OBDII. Preparation of dealer's keys.
3) Mileage recalibration by OBDII
4) Clearing crash data DTCs by OBDII
5) Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
6) Exchange speed limit of MMI-TV system

1. Standard diagnostic functions:
1) Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO transport protocol (CAN), KWP1281 or KWP2000 over K-Line
2) For all electronic control units reading identification data
3) For all electronic control units read error (DTCs)
4) For all electronic control units clear error (DTCs)
5) Scan all units
6) Broadcast requests
7) Measured values
8) Adaptation