We provide Solar Water Heater, Water Heater, Solar Water Heater Tube, Hot Water Heater, solar hot water, Solar Water Heaters, solar energy heater, Solar Energy Water Heater, Solar Heat Collector, Hot Collector, Solar Water, pressuried solar heater, Solar Products.
1. Excellent figure, stable performance, simple installation, easy to combine with existing water system.
2. Special designed for split solar hot water system. Connect in series to provide large hot water for commercial, buildings, hotels, hospitals, swimming pool etc. One or several glass tube broken will not influence system work. High efficiency, low maintenance, convenient replacement.
Parameters:
1) Thermal capacity:
The temperature of condesation top is higher than 62.5 degree centigrade under a test in 70 degree centigrade, 600mm depth water.
Heat conduction power higher than 10W
2) Attenuation
Attenuation rate of heat efficiency will be lower after 10% during normal use for 5years.
3) Conduction medium is mineral and harmless.
4) Promise 5 years of guarantee.
How it works:
1) The operation of the SPA solar collector is very simple
2) Solar absorption: Solar radiation is absorbed by the solar tubes
And converted into heat
2) Solar heat transfer: Heat pipes conduct the heat from within the solar
Tube up to the header pipe
3) Solar energy storage: Water is circulated through the header, via
Intermittent pump cycling. Each time the water circulates through the
Header, the temperatures is raised by 5-10oC /
9-18oF. Throughout the day, the water in the storage
Tank is gradually heated
We adopt the advanced technology to produce solar water and its related spare parts.
Vacuum tubes are the heart of solar water heater, our vacuum tube uses the borosilicate glass which has magnetron sputtering aluminum nitride absorbing coat.
We have 2 models: 47mm x 1, 500mm, 58mm x 1, 800mm,
Insulating layer was polyurethane foamed, Bracket made of premium cold roll with plastic spray or stainless steel. Fastening pieces was made of stainless steel screw.
1. Excellent figure, stable performance, simple installation, easy to combine with existing water system.
2. Special designed for split solar hot water system. Connect in series to provide large hot water for commercial, buildings, hotels, hospitals, swimming pool etc. One or several glass tube broken will not influence system work. High efficiency, low maintenance, convenient replacement.
Parameters:
1) Thermal capacity:
The temperature of condesation top is higher than 62.5 degree centigrade under a test in 70 degree centigrade, 600mm depth water.
Heat conduction power higher than 10W
2) Attenuation
Attenuation rate of heat efficiency will be lower after 10% during normal use for 5years.
3) Conduction medium is mineral and harmless.
4) Promise 5 years of guarantee.
How it works:
1) The operation of the SPA solar collector is very simple
2) Solar absorption: Solar radiation is absorbed by the solar tubes
And converted into heat
2) Solar heat transfer: Heat pipes conduct the heat from within the solar
Tube up to the header pipe
3) Solar energy storage: Water is circulated through the header, via
Intermittent pump cycling. Each time the water circulates through the
Header, the temperatures is raised by 5-10oC /
9-18oF. Throughout the day, the water in the storage
Tank is gradually heated
We adopt the advanced technology to produce solar water and its related spare parts.
Vacuum tubes are the heart of solar water heater, our vacuum tube uses the borosilicate glass which has magnetron sputtering aluminum nitride absorbing coat.
We have 2 models: 47mm x 1, 500mm, 58mm x 1, 800mm,
Insulating layer was polyurethane foamed, Bracket made of premium cold roll with plastic spray or stainless steel. Fastening pieces was made of stainless steel screw.
| Technical Data of Heat pipe collector | ||
| Production Model | JX-58/30 | JX-58/20 |
| Numbers of tube(pcs) | 30 | 20 |
| Absorber area approx.(m2) | 2.439 | 1.626 |
| Gross size(m) | 1.99*2.1*0.154 | 1.99*1.4*0.154 |
| Weight Empty(kg) | 93.5 | 63 |
| Hydraulic Connections | G3/4" male thread | |
| Fluid volume(L) | 1.7 | 1.2 |
| Min. volume flow rate per collector(L/H) | 108 | 72 |
| Rated volume flow rate per coll.(L/H) | 180 | 120 |
| Max. volume flow rate per collector(L/H) | 1200 | 1200 |
| Maximum operation pressure(Bar) | 6 | |
| Test pressure(Bar) | 9 | |
| Heat transfer fluid | Anti-freeze Fluid (Water-Glycol) | |
| Max.working temp. | 250C | |
| hot water(L/Day) | 240C | 160 |
| ΔT | 35C(Radiation>=800w/m2.day) | |
| Collector efficiency | 76.4% 76.2% | |
| Medium | Pure water | |
| Start-up Temperature of heat pipe | <=30C | |
| Warranty | 5 years, Vacuum tube for 15 years. | |
| Material Details | ||
| Production Model | JX-58 | |
| Flow type | Heat pipe | |
| Heat pipe material | T2 copper | |
| Heat pipe size | Top: Ø14* 1mm; Body: Ø8* 0.7mm | |
| Tube diameter | φ47/1500mm or φ58/1800mm | |
| Solar vacuum glass tube | High boron-silicon | |
| Coating of absorber on glass tube | CU/SS-ALN(H)/SS | |
| fins around heat pipe | Double long Aluminum(1.68m) | |
| Manifold pipe material | TP2 copper (Ø35x0.8mm) | |
| Manifold casing material | 6063 Aluminum alloy (2.0mm) | |
| Insulation material in manifold casing | Glass fiber | |
| Thickness of insulation(mm) | 45 | |
| Density of insulation (kg/m3) | 90 | |
| Frame material | Aluminium alloy frame(2mm) | |
| Frame and manifold casing finish | Black Powder coated | |