Drift beads microwave dryer uses:
Floating bead microwave dryer is mainly used for chemical paste materials, liquid materials, powder materials, granular materials, quick drying, different types of products we can design suitable for the production of the equipment according to the process.
Drift beads microwave dryer features:
The microwave dryer is characterized by continuous production equipment, and only need electricity, no other energy of the materials can be dried to the desired moisture, equipment, small footprint, non-polluting, simple operation; no warm-up did not stop After there is energy loss. Artificial, high product quality. A high degree of advanced equipment, high-tech products to other devices can not be replaced.
Technical parameters of silicon carbide microwave dryer
Device model
YN-45HM10
Input power
Three-phase five-wire 380V ± 10% 50Hz ± 1% (zero line must be as large as the phase line)
Rated input power
70KVA
Microwave output power
45KW
(Power sub-adjustable)
Microwave frequencies
2450MHz ± 50MHz
Overall size of equipment
L × W × H
15 140 × 1415 × 1650 (mm)
Transmission speed
0.5-5M/min
Ambient temperature
0-40 ℃
Relative humidity ≤ 80%
The number of microwave heating box
10
In accordance with the production design
Microwave fed into the
Top fed into the
Specially designed in accordance with the process requirements
The microwave suppressors opening height of
50mm
Transformer cooling method
Oil-immersed water-cooled
Magnetron cooling method
Water-cooled
Equipment, microwave leakage standard
Line with national GB10436-89 standard (≤ 5mw/cm2)
Equipment electrical safety standards
Line with national GB5226 electrical safety standards
Transmission power specifications:
1.5KW
Frequency Control
Temperature range, accuracy:
0-350 ℃
Control mode
Button control
Optional PLC control
Equipment production
Per hour dehydration: 45KG.
Microwave drying equipment: glass fiber, chemical raw materials, starch, oxalic acid, cobalt, cellulose (eg hydroxyethyl cellulose, carboxymethyl cellulose, etc.), mannitol, nickel hydroxide, lithium cobalt oxide, graphite, carbon brushes, carbidesilicon, calcium chloride dihydrate, activated carbon, alumina, zirconium oxychloride, zirconium oxide, zirconium hydroxide, zirconium carbonate, zirconium is zirconium ammonium carbonate, silica, zirconium silicate, zirconium potassium carbonate, metal dust ash, coal heating, iron gold, oil-based ink driers, water-based ink cross-linked anti-agent, expandable graphite, a variety of ceramic zirconium oxide, iron oxide, positive temperature coefficient (PTC) thermistor materials dipped slightly skeleton amine submerged pharynx Qu TC components.
Device size can be output to custom, our company can provide prototype for process test, to visit and negotiate!
Floating bead microwave dryer is mainly used for chemical paste materials, liquid materials, powder materials, granular materials, quick drying, different types of products we can design suitable for the production of the equipment according to the process.
Drift beads microwave dryer features:
The microwave dryer is characterized by continuous production equipment, and only need electricity, no other energy of the materials can be dried to the desired moisture, equipment, small footprint, non-polluting, simple operation; no warm-up did not stop After there is energy loss. Artificial, high product quality. A high degree of advanced equipment, high-tech products to other devices can not be replaced.
Technical parameters of silicon carbide microwave dryer
Device model
YN-45HM10
Input power
Three-phase five-wire 380V ± 10% 50Hz ± 1% (zero line must be as large as the phase line)
Rated input power
70KVA
Microwave output power
45KW
(Power sub-adjustable)
Microwave frequencies
2450MHz ± 50MHz
Overall size of equipment
L × W × H
15 140 × 1415 × 1650 (mm)
Transmission speed
0.5-5M/min
Ambient temperature
0-40 ℃
Relative humidity ≤ 80%
The number of microwave heating box
10
In accordance with the production design
Microwave fed into the
Top fed into the
Specially designed in accordance with the process requirements
The microwave suppressors opening height of
50mm
Transformer cooling method
Oil-immersed water-cooled
Magnetron cooling method
Water-cooled
Equipment, microwave leakage standard
Line with national GB10436-89 standard (≤ 5mw/cm2)
Equipment electrical safety standards
Line with national GB5226 electrical safety standards
Transmission power specifications:
1.5KW
Frequency Control
Temperature range, accuracy:
0-350 ℃
Control mode
Button control
Optional PLC control
Equipment production
Per hour dehydration: 45KG.
Microwave drying equipment: glass fiber, chemical raw materials, starch, oxalic acid, cobalt, cellulose (eg hydroxyethyl cellulose, carboxymethyl cellulose, etc.), mannitol, nickel hydroxide, lithium cobalt oxide, graphite, carbon brushes, carbidesilicon, calcium chloride dihydrate, activated carbon, alumina, zirconium oxychloride, zirconium oxide, zirconium hydroxide, zirconium carbonate, zirconium is zirconium ammonium carbonate, silica, zirconium silicate, zirconium potassium carbonate, metal dust ash, coal heating, iron gold, oil-based ink driers, water-based ink cross-linked anti-agent, expandable graphite, a variety of ceramic zirconium oxide, iron oxide, positive temperature coefficient (PTC) thermistor materials dipped slightly skeleton amine submerged pharynx Qu TC components.
Device size can be output to custom, our company can provide prototype for process test, to visit and negotiate!