Product Main

Specifications

Gas generator type: 50kw gas generator
 cummins brand 50kw Biomass Generator/Bio Gas Generator/Natural Gas Generator; 50kw Biomass Generator/gas generator;50kw Biomass Generator Gasification; 50kw Biomass coal power/power plants; 50kw Coal power plants/biomass power plant; 80kw Biomass Power/power ;
Biomass gasifying devices; 120-1000kw biomass genset;
120kW Biomass gasification/electricity , of high quality, best cost performance. Taking 85% of gas genset market in China.
Shengdong 100kw high quality biogas/landfill gas fulled generator set/genset/engine
Conditions for Using
1. The temperature of the gas should not surpass 40ºC when the distance between the gas and the pressure regulating valve for air inflow is 1m.
2. The range of the pressure that this biogas generator set sustain should be 3kPa~10kPa and the fluctuated frequency should not surpass 1kPa/min.
3. The content of the methane in the biogas should not be lower than 45% and its fluctuated frequency should not surpass 2%/min.
4. The content of H2S should not surpass 200mg/Nm3 and the content of NH3 should not surpass 20mg/Nm3.

5. The granularity of the impurity should not surpass 5μ M and the content of the impurity should not surpass 30mg/Nm3.
6. The content of water in biogas used in this biogas generator set should not surpass 40g/Nm3.
7. For biogas with methane of about 30%~45%, low density biogas generator should be used.
For those gases which cannot reach the conditions above, this biogas generator set should be specially allocated after evaluation according to the specified composition, pressure, temperature, etc. Provided. 

 
Genset
Model
Power(kVA/kW) Full Load
  ( /h)
Engine
Model
Disp. (L)  (Cylinder) Alternator Model Dimension
L× W× H(mm)
Weight
(kg)
standby Prime   Marathon Faraday
MC55N 55/44 50/40 13 M-4BTA3.9 3.9 (4) MP-40-4 FD2B 1950*1000*1450 850
MC63N 63/50 56/45 15 M-4BTAA3.9 3.9 (4) MP-48-4 FD2C 1950*1000*1450 850
MC83N 83/66 75/60 19 M-6BTA5.9 5.9 (6) MP-64-4 FD2DS 2280*1050*1500 1000
MC104N 104/83 94/75 24 M-6BTAA5.9 5.9 (6) MP-75-4 FD3A 2280*1050*1500 1000
MC118N 118/94 106/85 27 M-6BTAA5.9 5.9 (6) MP-90-4 FD3B 2280*1050*1500 1000
MC131N 131/105 119/95 29 M-6CTA8.3 8.3 (6) MP-104-4 FD3C 2250*1050*1560 1350
MC144N 144/115 130/104 32 M-6CTAA8.3 8.3 (6) MP-104-4 FD3DS 2250*1050*1560 1350
MC165N 165/132 150/120 38 M-6LTAA8.9 8.9(6) MP-120-4 FD3D 2460*1010*1700 1500
MC250N 250/200 228/182 57 M-NTAA855 14(6) MP-200-4 FD4S 2900*1200*1850 2200
MC413N 413/330 375/300 88 M-KTAA19 18.9(6) MP-300-4 FD4L 3440*1300*1920 4630
MC688N 688/550 625/500 145 M-KTAA38 37.8(12) MP-500-4A/S FD5L 4800*2060*2380 7500
MC963N 963/770 875/700 200 M-KTAA50 50.3(16) MX-700-4 FD6B 5000*2200*2400